Shop for zinc anode kit for mercury f30 f40 f60hp engines

The TN 100 is a replacement inline zinc pool anode kit for the TN-IL; 1 inch. Inline Anodes have become a must install component in salt water pools for many top builders. These builders believe that Inline Anodes solve the complex corrosion problems present when salt system sanitation is used. The inline Anode is a new concept in anodic protection. The zinc anode is attached to the Pool Bonding grid which connects all metal components tied to the grid. Greater surface area means more protection for the pool components. The anodes mass (weight) determines the amount of protection an anode can supply until it has completely corroded. A sheet of zinc foil with a large surface area and small mass will provide a lot of protection over a short period of time as it will quickly corrode away. A zinc ball with a large mass and relatively small surface areas area will provide a small amount of component protection over a long period of time. TechNode Anodes are designed to provide maximin protection yet have reasonably lon expected anode life. This combination of anode mass and high surface areas makes TechNode the most efficient anode in the pool industry. Compare TechNode's specifications with the competition.

MasterGuard 500 Series Installation Kit for Engines with 4.25 in. or 4.75 in. Gearcases. Lifetime warranty for engines under 200hp with aluminum or stainless steel props and engines 200 plus hp with aluminum props only. MasterGuard Installation/Hub Kits carry the only Lifetime Warranty in the WORLD, . Hubs have no warranty restrictions, except for extreme commercial use. Saves a boater up to 33% on Replacement propeller purchases (need to purchase prop housing only). 1-piece design: durable marine Bronze with Over Molded Glass Filled Nylon for Long Life. Re - useable after a Prop Strike. Warranted even if the prop is Destroyed, (consumer normal use only, not applicable on commercial applications). Enhanced lower unit protection. Warranted even if used in competitive propeller housings (Mercury, Michigan Wheel, Solas). Each kit contains a hub, thrust washer, and other hardware for installing Turning Point Express Mach3, Mach3 OS, Mach4, and Hustler propeller housings on most engines with 4.25 in. or 4.75 in. gearcase. Also used as a hub upgrade to fit Solas Rubex, Michigan Wheel XHS, and Mercury FloTorq propeller housings.

Volvo Anode Kits - For Salt And Brackish Water. Quality marine product. Limited warranty.

CM762145 Trim Tab. CM806105 Bearing Carrier. CM821629C Drive shaft Housing. CM821631 Gimbal Housing. CM806189 Trim Ram (2)806189. KIT Includes:806189 Alpha Lift Ram (2).

Comes complete with 3 anodes, hardware and install instructions. CMY4060KIT Yamaha 4T 40-60HP Anode Kit- Includes: CM6E04525111 (3), CM67C4525100 (1), CM67C4537100 (1). Quality marine product. Limited warranty.

Comes complete with 3 anodes, hardware and install instructions. CMY6090KIT Yamaha 60-90HP Anode Kit- Includes: CM6884537102 (1), CM6H14525102 (1). Quality marine product. Limited warranty.

MasterGuard 500 Series Installation Kit for Engines with 4.25 in. or 4.75 in. Gearcases. Lifetime warranty for engines under 200hp with aluminum or stainless steel props and engines 200+hp with aluminum props only. MasterGuard Installation/Hub Kits carry the only Lifetime Warranty in the WORLD. Hubs have no warranty restrictions, except for extreme commercial use. Saves a boater up to 33% on Replacement propeller purchases (need to purchase prop housing only). 1-piece design: durable marine Bronze with Over Molded Glass Filled Nylon for Long Life. Re-useable after a Prop Strike. Warranted even if the prop is Destroyed. (consumer normal use only, not applicable on commercial applications). Enhanced lower unit protection. Warranted even if used in competitive propeller housings (Mercury, Michigan Wheel, Solas). Each kit contains a hub, thrust washer, and other hardware for installing Turning Point Express Mach3, Mach3 OS, Mach4, and Hustler propeller housings on most engines with 4.25 in. or 4.75 in. gearcase. Also used as a hub upgrade to fit Solas Rubex, Michigan Wheel XHS, and Mercury FloTorq propeller housings.

GLM's 29610 Outboard Maintenance Kit is designed for use with Mercury 75, 90, 115 HP, 4-Stroke (2B094996 and up). The kit includes (1) 12161 Complete Water Pump Kit, (1) 12945 Aluminum Anode Kit, (1) 13611 Thermostat, (1) 24992 Oil Filter, (1) 40136 Fuel Filter, and (4) 74760 Spark Plugs. 24992 Oil Filter not sold separately.

GLM's 29510 Outboard Maintenance Kit is designed for use with Mercury V6, Optimax, 2,5L, 2-Stroke (1B227000 and up, non-pro models). The kit includes (1) 12280 Upper Water Pump Housing Kit, (1) 12945 Aluminum Anode Kit, (2) 13010 Thermostat, (1) 24911 Inline Oil Filter, (2) 30610 Gasket, and (6) 74720 Spark Plugs. Constructed of durable materials to withstand the harsh marine environment.

Volvo Anode Kits - For Salt Water. Quality marine product. Limited warranty.