Shop for ziboo asp2 soft tube static pressure probes

The TP3000-5C-150C Temperature and Pressure Relief Valve with 5" probe, set at 150 psi, is utilized on commercial water heaters for protection against over-temperature or excessive pressure. The copper thermal element is epoxy-coated for added theft protection. TP3000 materials include cast brass or bronze for the main valve body, stainless steel internals and springs, and FDA approved, epoxy-coated copper tube probes. All TP3000 Models include a 1 FNPT inlet x 1 FNPT outlet connection, and a relief temperature of 210 degree F.

The JDI-20EV-B is equipped with a 2-gallon transparent bowl which gives the operator the option to check quantity and quality of oil prior to discharging into the tank below. The bowl is heat resistant to a maximum of 212 F. Designed to remove used oil and other fluids from any vehicle when conventional draining methods are not practical. Fluid evacuators remove used oil and other "non-flammable" fluids from almost any vehicle using compressed air and an on-board venturi vacuum system. Features include: 20-gallon capacity, Heavy-duty steel construction, Powerful venturi vacuum system, Easy-to-read vacuum gauge, 7' suction hose, Six suction probes for most applications, Three "OE Style" evacuator adapters, Convenient storage tube for suction probes, Wheels and casters are oil and chemical resistant for longer life, Self-evacuating with 10' quick disconnect evacuation hose, Sight tube for quick indication of fluid level.

The P1000AXL-30C Pressure Relief Valve is set at 30 psi and utilized on water heating storage vessels for protection against over-temperature or excessive pressure (not for steam service). Primarily used on storage tanks, P1000AXL materials include cast brass or bronze for the main valve body, quality stainless steel 300 series internals, stainless steel springs, and FDA approved, epoxy-coated copper tube probes. Multiple pressure relief settings and inlet/outlet connection options provide easy, ultra versatile installation capabilities, and the P1000AXL assembly shall be used where pressure only relief is required.

The P1000AXL-150C Pressure Relief Valve is set at 150 psi and utilized on water heating storage vessels for protection against over-temperature or excessive pressure (not for steam service). Primarily used on storage tanks, P1000AXL materials include cast brass or bronze for the main valve body, quality stainless steel 300 series internals, stainless steel springs, and FDA approved, epoxy-coated copper tube probes. Multiple pressure relief settings and inlet/outlet connection options provide easy, ultra versatile installation capabilities, and the P1000AXL assembly shall be used where pressure only relief is required.

The Cash Acme FWC Pressure Relief Valves are designed for Commercial and Industrial application including thermal expansion protection, static pressure and over-pressure relief, very low capacity pump relief and other uses of similar nature where tight shut-off is required. The Cash Acme FWC valves are small, low-cost relief valves suitable for static over-pressure protection. A calibrated adjusting screw allows for occasional changes in pressure setting without the use of a pressure gauge. Material: Brass.

The P1000AXL-125C Pressure Relief Valve is set at 125 psi and utilized on water heating storage vessels for protection against over-temperature or excessive pressure (not for steam service). Primarily used on storage tanks, P1000AXL materials include cast brass or bronze for the main valve body, quality stainless steel 300 series internals, stainless steel springs, and FDA approved, epoxy-coated copper tube probes. Multiple pressure relief settings and inlet/outlet connection options provide easy, ultra-versatile installation capabilities, and the P1000AXL assembly shall be used where pressure only relief is required. Their applications.

Sludge and soap residue build-up on the sides of RV black and gray water tanks can lead to false readings. The sludge acts like a conductor between the positive content level sensors down the tank to the negative probe that is located at the bottom of the tank. This will trigger the indicator panel to show that there is liquid level in the tank even when there is none. Horst Miracle Probes are considerably longer than standard probes and the sensor is surrounded by a Delrin body and Teflon tube which prevents any liquid residue or sludge from setting up a conductive path. The black tank probes have a specially designed "roof" over the probe sensor to prevent toilet paper from coming into contact with the probe and creating a false probe contact and related reading.

The Husky 6-Piece Picks and Tweezers Set is ideal for use in precision work on electronics, eyeglasses and jewelry repair. The set includes 4 different picks: straight probe, 35 bend, 90 bend and 180 hook probes. The 2 included tweezers feature an anti-static coating, making them safe to use when fixing electronic components.

Backed by UEi Service+ to give up to 10-years warranty, same day recertification, and a reduced cost of ownership. The C165+ Residential/Commercial Combustion Analyzer is easy to use with a rugged design, multiple sensor protections, altitude compensation and differential pressure. Prints to optional printer and wireless App. The new LINK feature connects the included wireless pipe clamp temperature probes and other optional probes to the C165+. Essential information for installing and maintaining furnaces and boilers all in 1-device.

To keep your system running like new purchase Intec's Static Pressure Gauge. The gauge lets you know when to do preventative maintenance. The Static Pressure Gauge is a must have for all dense pack users.