Shop for watershield shower system foam and cement backer bo

This Everbilt screws and washers set are made for use with all Everbilt foam, waterproofed backer boards. The screws and washers are ceramic coated and galvanized to prevent rusting. The prongs on the washers fasten quickly to the backer board making for easy and secure installation. The Everbilt foam backer boards can be installed over wood and metal studded walls horizontally or vertically by using this screws and washers set. To install, place screws and washers 12 inches apart vertically and 16 inches apart horizontally. It is best when applying the screws to create a slight depression in the board to reduce any build up at the screw. Vertical seams must be staggered. This pack contains 160 Screws and 160 Washers. Screw diameter 1.625 in. Material: Galvanized Steel.

The Backer-On 1-5/8 in. Cement Board Screws are designed for attaching HardieBacker or equivalent fiber cement backerboard to wood or light gauge steel studs. The Rock-On 1-1/4 in. Cement Board Screws are designed for attaching Durock, Wonder board or equivalent glass-mesh cement backerboard to wood or light gauge steel studs. Backer-On's and Rock-On's patented serrated head design countersinks for flush seating at any angle, providing a smooth surface for tile. The Star drive recess with T-25 bit provides StikfitTM for 1-handed installation. Backer-On and Rock-On screws feature a Climacoat corrosion resistant finish that prevents rust from bleeding into grout and are perfect for use in high moisture areas such as baths, showers, countertops and floors. Conforms to ANSI A108.11 for cement board attachment. Backer-On and Rock-On screws can be installed with a standard impact or drill/driver and T-25 Star drive bit (included with product) for cement board fastening done right.

The Backer-On 1-5/8 in. Cement Board Screws are designed for attaching HardieBacker or equivalent fiber cement backerboard to wood or light gauge steel studs. Backer-On's patented serrated head design countersinks for flush seating at any angle, providing a smooth surface for tile. The Star drive recess with T-25 bit provides StikfitTM for 1-handed installation. Backer-On screws feature a Climacoat corrosion resistant finish that prevents rust from bleeding into grout and are perfect for use in high moisture areas such as baths, showers, countertops and floors. Conforms to ANSI A108.11 for cement board attachment. Backer-On screws can be installed with a standard impact or drill/driver and T-25 Star drive bit (included with product) for cement board fastening done right.

The Everbilt Shower kit is a waterproof system which includes all the underlayment components needed to waterproof the walls for tiling around a bathtub or shower base. The 1/2 in. thick Everbilt backer board panels are applied directly to the stud framing eliminating the need for gypsum or cement board without having to add a waterproof sealant. Ten (10) Backer boards are included in the kit that cover 106 sq.ft. The 32 in. x 48 in. x 1/2 in. wall backer board is a thin, lightweight (5lbs vs 45 lbs. for traditional cement backer), waterproof and vapor-retardant backer board that consists of a 2 sided extruded polystyrene rigid foam core. The backer boards are easy to cut with a standard utility blade and do not generate the dust convention backer boards create. There are no VOC's in the backer board and can be cut easily at the job site. The Everbilt multipurpose construction adhesive bonds and seals the waterproof backer boards as well as many other materials. The kit includes 10 Everbilt backer board panels, Everbilt waterproofing seam tape (66 ft. x 4.8 in.), pipe seal, mixing valve collar seal, 2 inside and 2 outside pre-formed waterproof corners, 2 tubes of 11 oz. caulking sealant adhesive and 160 screws and washers. Shower pan, curb and drain sold separately. Material: Porcelain-Coated Cast Iron.

The Everbilt Shower kit is a waterproof system which includes all the underlayment backer boards, multipurpose construction adhesive caulking and screws and washers needed to waterproof the walls for tiling around a bathtub or shower base. The Everbilt 1/2 in. thick backer board panels are applied directly to the stud framing eliminating the need for gypsum or cement board. Ten (10) Backer boards are included in the kit that cover 106 sq.ft. The 32 in. x 48 in. x 1/2 in. wall backer board is a thin, lightweight (5 lbs VS 45lbs for cement board), waterproof and vapor-retardant backer board that consists of an extruded polystyrene rigid foam core. The backer boards are easy to cut with a standard utility blade and do not generate the dust conventional backer boards create. Also, there is no need to place/paint liquid waterproofing membrane on the backer boards. They are pre-waterproof and anti-microbial. There are no VOC's in the backer board and can be cut easily at the job site. The Everbilt multipurpose construction adhesive bonds the waterproof backer boards as well as many other materials. The kit includes 10 Everbilt backer board panels, 2 tubes of 11 oz. of the multipurpose Contruction adhesive sealant and 160 screws and washers. Shower pan, curb and drain, and other waterproofing sold separately.

No matter the quality, cost, or extravagance of a tile installation project, the integrity of the tile is only as good as its foundation. This thin and ultra lightweight 18 in. x 36 in. x 1/8 in. waterproof backer board is specific for bathroom and kitchen backsplashes and mosaic tiles. Because some backsplashes and mosaic tiles are thinner than most standard tile sizes, this 1/8 in. backer board will allow your backsplashes and mosaic tiles to lay flush with the adjoining tiles, thus, creating a seamless look to your tile project. Additionally, this thin backer board can be easily cut to fit any existing bathroom and kitchen spaces using only a sharp razor blade knife, resulting in no dust, less mess and making it easier to breathe and handle during your home project installations. Material: Foam.

The 24" x 48" x 2" bench backer boards create a perfect waterproof seating solution (both shower benches and shower seats) for your shower, and are designed to integrate with the Everbilt shower system. These lightweight, stable, and load bearing backer boards are waterproof and vapor-resistant, consisting of an extruded polystyrene rigid foam core that is reinforced with glass fiber mesh with alkali-resistant finish on both sides and coated with a polymer-modified cement. These shower benches and seats install much quicker and easier than metal tray or concrete seats, and are ready to tile. Plus, these bench backer boards bond well to modified thin-set mortar. Pairs well with Everbilt screws and washers. This package includes three waterproof backer board pieces to build your optimal shower bench or seat.

No matter the quality, cost, or extravagance of a tile installation project, the integrity of the tile is only as good as its foundation. The 32 in. x 4 ft. x 1/2 in. wall backer board is a thin, lightweight, waterproof and vapor-retardant backer board that consists of an extruded polystyrene rigid foam core. The rigid foam is reinforced with glass fiber mesh (with alkali-resistant finish) on both sides and coated with a polymer-modified cement. With its special properties, the wall backer board has a wide variety of applications and is the perfect substrate for walls and other wet areas. Using this backer board to build walls over stud framing in wet areas is an efficient alternative to using gypsum board. Pairs well with Everbilt screws and washers.

The 36" x 48" x 1/4" waterproof tile floor backer boards are used as a tile underlayment that works with all kitchen floors, bathroom floors, and other large wet floor areas in your home. All our backer boards are manufactured with a waterproof proprietary blend of synthetic polymer mortar and an alkali resistant fiber mesh that provides a rigid structure with exceptional bonding capabilities to tile. This tile floor backer board is thin and ultra lightweight, yet has high bond strength and heavy-duty tile floor board is easy to install and easy to handle, allowing you to tile directly onto the backer board. These waterproof boards are easily cut down without any mess left behind, and are fastened to the substrate with the Everbilt screws and washers. Material: Foam.

The 36 in. x 48 in. x 1/4 in. waterproof tile floor backer boards are used as a tile underlayment that works with all kitchen floors, bathroom floors, and other large wet floor areas in your home. All our backer boards are manufactured with a waterproof proprietary blend of synthetic polymer mortar and an alkali resistant fiber mesh that provides a rigid structure with exceptional bonding capabilities to tile. This tile floor backer board is thin and ultra lightweight, yet has high bond strength and heavy-duty tile floor board is easy to install and easy to handle, allowing you to tile directly onto the backer board. These waterproof boards are easily cut down without any mess left behind and are fastened to the substrate with the Everbilt screws and washers. Material: Foam.