Shop for usb tester and data masker

The Triplett USB-Bug is designed to test the power, voltage, and current of USB 2.0 or USB 3.0 charging ports. Connect the USB-Bug inline between the power source and the device you are trying to charge. Test current from 0 to 3 Amps. If the current is over 3 Amps, the USB-Bug will flash the decimal point quickly. Test voltage from 3.2 VDC to 30 VDC. If the voltage is greater than or equal to 5.6 VDC, the decimal point indicator on the voltage measurement will flash quickly. If the voltage is less than 4.4 VDC, the decimal point indicator on the voltage measurement will flash slowly. Test power from 0 to 99.9W. Test Capacity: the USB-Bug will display the Amp hours (Ah) and milliamp hours (mAh) that have passed through the Tester. This displays as a cumulative number and is useful when determining how quickly/effectively a portable battery charger is working. The USB Bug has a built-in Smart Chip for Intelligent Charging that allows it to determine the safest maximum current your PD can accept. It can charge your phone or tablet up to 50% faster than aftermarket/generic chargers. There are two USB out ports. The top port, called the Unmasked Port, allows data to transfer while charging. The bottom port, called the Masked Port, blocks any data from being transferred. You can use the Masked Port to charge your phone or tablet without having to worry about anyone accessing your data.

Insulation tester up to 5kV. Broad Range of Testing Voltage: Testing voltages with broad range can be generated (from 250-Volt to 5 KV). Testing voltage can be preset as 250-Volt, 500-Volt, 1 KV, 2.5 KV, or 5 KV, or as a voltage Test can be increasing or decreasing in steps of 25-Volt or 100-Volt. Insulation Diagnosis: PI and DA. can be automatically calculated and displayed. Step-voltage measurements and temperature compensation is carried out. Large Storage Memory: Up to 100 manually tested data and 10 groups of log-test data can be saved. Test data can be read on LCD, or uploaded to PC. The meter is equipped with a USB interface.

Use the AutoLink AL549 to quickly scan U.S., Asian, and European vehicles, 1996 and newer for engine, and ABS codes. Read and erase codes, view Freeze Frame and Live Data. Color-coded Fault and IM Readiness status. Enhanced PCM and ABS coverage. Supports all 10 Modes of OBD II. Basic battery, starter, and charging system tester. Record and Playback data feature. Print via PC and included USB cable. 1-Year Limited Warranty.

Forney 57300 Multi-Tester, Digital

This indispensable 4-piece household tester kit includes the most commonly used testers to test Voltage, GFCI receptacles, batteries, and USB ports. The voltage tester allows the user to verify the presence of AC voltage prior to working on an electrical installation or during troubleshooting without requiring physical contact with live electrical conductors. The included GFCI receptacle tester detects common wiring problems in standard and GFCI protected outlets. Simply plug it in and view the light pattern on the tester to determine if it's correct, open ground, open neutral, open hot, hot/grd reverse, or hot/neu reverse. Tester works on 110-125 VAC receptacles only and will not indicate quality of ground. The battery tester tests common household battery types (AA, AAA, C, D, and 9-Volt batteries) to determine existing charge. Finally, the USB tester can check USB ports for the presence of voltage and test for proper wiring and polarity. Simply plug it into a USB port and the indicator bulb will glow a certain color to tell you the condition of the USB port.

This simple, compact data cable tester for RJ11, RJ12 and RJ45 terminated voice and data cables for Miswires, Open-Faults, Short-Faults and Shield. Instant LED responses indicate cable status. The test remote stores securely in the tester body. The Auto Power-Off feature shuts the tester down automatically to save the 9V battery (included).

This replacement remote works with Klein's LAN Explorer tester (VDV526-100). Tests RJ11, RJ12 and RJ45 terminated voice and data cables for Miswires, Open-Faults and Short -Faults. The remote stores securely in the tester body.

This replacement remote works with Klein's LAN Scout Jr. 2 Data Cable Tester (Cat. No. VDV526-200). Tests RJ45 terminated data cables for Miswires, Open-Faults, Short -Faults, Cross-over and Shield. The remote stores securely in the tester body.

The Klein Tools ET910 is a USB digital meter and tester combination for most common USB-A ports, including Qualcomm Quick Charge ports. It accurately and reliably measures and displays the USB port voltage, current, capacity, energy and resistance simultaneously. It can also test the maximum current delivery capability of the USB port with built-in fixed loads so user need not connect to an external load. It will function with any USB-A port that has the ability to deliver power. It requires NO batteries as it draws power from the power source to function.

The VDV Scout Pro 2 Tester Kit is a versatile voice/data/video cable tester that locates and tests coax, data and telephone cables. Identify multiple cable runs with included remotes. With this kit, you can ensure fast and accurate cable installations each time.

The VDV Scout Pro Self-Storing Remote #1 is a replacement part for Klein's Scout Pro cable tester series (for specific models, see below). With the tester, the remote can determine continuity on voice, data and video connections. It can simultaneously test video and data cables saving time and improving efficiency.