Shop for turning point 21432311 hustler series 13 1

MasterGuard 500 Series Installation Kit for Engines with 4.25 in. or 4.75 in. Gearcases. Lifetime warranty for engines under 200hp with aluminum or stainless steel props and engines 200 plus hp with aluminum props only. MasterGuard Installation/Hub Kits carry the only Lifetime Warranty in the WORLD, . Hubs have no warranty restrictions, except for extreme commercial use. Saves a boater up to 33% on Replacement propeller purchases (need to purchase prop housing only). 1-piece design: durable marine Bronze with Over Molded Glass Filled Nylon for Long Life. Re - useable after a Prop Strike. Warranted even if the prop is Destroyed, (consumer normal use only, not applicable on commercial applications). Enhanced lower unit protection. Warranted even if used in competitive propeller housings (Mercury, Michigan Wheel, Solas). Each kit contains a hub, thrust washer, and other hardware for installing Turning Point Express Mach3, Mach3 OS, Mach4, and Hustler propeller housings on most engines with 4.25 in. or 4.75 in. gearcase. Also used as a hub upgrade to fit Solas Rubex, Michigan Wheel XHS, and Mercury FloTorq propeller housings. Material: Metal.

Hustler Aluminum 3 Blade Props for 90-300+hp Engines with 4.75 in. Gearcases. Boasting the same race-proven geometry as Turning Point's stainless steel propellers, Turning Point Hustler aluminum propellers resist blade flex to deliver both improved fuel economy and performance. Under acceleration, tuned exhaust vents in the prop barrel reduce water density around the blades to produce faster hole shots and higher horsepower. Stainless steel performance at aluminum prices. Prop blades resist flex for improved fuel economy and performance. Tuned exhaust vents improve hole shot. Squeeze casting adds strength, boosts performance and makes repair easier. Protected by 5-step powder-coated finish. Propellers fit COX, Evinrude, Honda, Johnson, Mariner, Mercury, MerCruiser, Nissan, OMC, OXE, Parsun, Suzuki, Tohatsu, Volvo Penta, and Yamaha Outboards and Sterndrives. Uses 500 series Installation/hub kits only-Sold separately. See application chart for engine application information and required Installation/hub kit part numbers. Turning Point Hustler aluminum props function just like Express stainless steel designs and run within 0.5MPH to 1MPH of each other most of the time. There are many reasons for this:- Hustler props are produced from the same stainless steel geometry and drawing. Hustler is cast using the latest state-of-the-art squeeze casting technologies. Material: Metal.

Hustler (Registered Trademark) Aluminum Swept Cleaver 4 Blade Props for 40-150hp Engines with 4.25 in. Gearcases. 4 Blades That Re-wrote the Rules. The props that put the "4" in Performance. These props re-wrote the rules, proving that you can run a 4-Blade that has:-Unprecedented hole shot, lift, handling, ease of steering, and rough water stability.-No top-end speed loss you experience with other manufacturers 00 ft. s, and will outrun most newer props, including 5 blade ski props. Squeeze Cast for Added Strength: Stainless steel performance is built into the Hustler Aluminum prop line. This is achieved through unique blade geometry and an exclusive Turning Point manufacturing process, Squeeze Casting. This process generates the highest mechanical properties attainable in a cast aluminum prop resulting from high density tighter grain structure. Stiffer blades means less flex and a faster prop. Competitors good looks. This is the Gold Standard in Aluminum Corrosion Protection. Prop looks Newer Longer. Compared to Competitors Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more Exhaust flow Area versus completive product. More Exhaust flow and less backpressure can generate more horsepower. Like headers for your boat. Material: Plastic.

MasterGuard 500 Series Installation Kit for Engines with 4.25 in. or 4.75 in. Gearcases. Lifetime warranty for engines under 200hp with aluminum or stainless steel props and engines 200+hp with aluminum props only. MasterGuard Installation/Hub Kits carry the only Lifetime Warranty in the WORLD. Hubs have no warranty restrictions, except for extreme commercial use. Saves a boater up to 33% on Replacement propeller purchases (need to purchase prop housing only). 1-piece design: durable marine Bronze with Over Molded Glass Filled Nylon for Long Life. Re-useable after a Prop Strike. Warranted even if the prop is Destroyed. (consumer normal use only, not applicable on commercial applications). Enhanced lower unit protection. Warranted even if used in competitive propeller housings (Mercury, Michigan Wheel, Solas). Each kit contains a hub, thrust washer, and other hardware for installing Turning Point Express Mach3, Mach3 OS, Mach4, and Hustler propeller housings on most engines with 4.25 in. or 4.75 in. gearcase. Also used as a hub upgrade to fit Solas Rubex, Michigan Wheel XHS, and Mercury FloTorq propeller housings. Material: Vinyl.

Turning Point Propellers 31430930 Express 4-Blade Stainless Steel Propeller for 40-150 HP Engines with 4.25 in. Gearcase is a right hand propeller and has a 14 in. Dia and a 9 in. pitch. The Prop that put the "four" in Performance. Turning Point's Four Blade Hustler revolutionized the aluminum propeller market when introduced over 6 years ago. No one had ever produced a state-of-the-art Swept Cleaver design for 40-150 HP applications. These props re-wrote the rules, proving that you can run a four blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers' propellers. These Turning Point props also produced up to 46% more reverse thrust than other comparable designs in recent tests. Now manufactured in our Industry leading TP17 stainless, the Express Mach4 series is perfect for any application that demands enhanced acceleration, cornering, and load carrying capabilities. This prop series is ideally suited for watersports, stern drive boats, tri-toons, bay boats, and any vessel that can use stern lift. It is our best upgrade of older stainless designs from the 70's, 80's, 90's, and '00's, and will outrun most newer props, including five blade ski props.

Turning Point Propellers 31501340 Express 4-Blade Stainless Steel Propeller for 90-300+hp Engines with 4.75 in. Gearcase is a left hand propeller and has a 15.3 in. diameter and a 13 in. pitch. The Prop that put the four in Performance. Turning Point's Four Blade Hustler revolutionized the aluminum propeller market when introduced over 6 years ago. No one had ever produced an aluminum propeller with two different blade shapes (they call it Dual Geometry) for 90-300+hp applications. This prop is uniquely engineered with two blade geometries: (diagram label 2) two blades utilize the Hustler high performance variable rake and aggressive pitch design for incredible hole shot and cornering and (diagram label 1) two blades utilize an offshore style design for high speed and maximum stern lift. These props re-wrote the rules, proving that you can run a four blade that has unprecedented hole shot, handling and rough water stability without the top-end speed loss you experience with other manufacturers’ propellers. Now manufactured in our Industry leading TP17 stainless, the Express Mach4 series is perfect for any application that demands enhanced acceleration, cornering and load carrying capabilities. This prop series is ideally suited for watersports, stern drive boats, tri-toons, bay boats and any vessel that can use stern lift. It is our best upgrade of older stainless designs from the 70’s, 80’s, 90’s and ’00’s and will outrun most newer props, including five blade ski props.

Turning Point Propellers H1-1013 Hustler 3-Blade Aluminum Propeller for 6-74 HP Engines with 3.5 in. Gearcase is a right hand propeller and has a 10.5 in. Dia and a 13.5 in. pitch. Turning Point has built their reputation on a relentless focus on engineering the best performing aluminum propellers in the World. Utilizing state-of-the-art Squeeze Casting technology, they produce Hustler 3 Blade Propellers that run as fast as their competitors' Stainless Steel Props, and even sometimes faster. Super stiff metallurgy, unique blade geometry, aggressive pitch, rake, and cup all give you the best they can offer: Stainless Performance at Aluminum Prices. Not only does top speed, handling and hole shot improve, but also mid-range performance, which will save you a ton in gas usage. If you want the most your boat and engine combination can offer, then the Hustler 3 Blade delivers. The Three Blade Hustler is great for boaters looking to get the most top end out of their boat, and offer excellent bow lifting capabilities. These props are perfectly matched to mid-range horsepower pontoons, fishing, ribs, and tiller boats. It will fit all 6-75 HP outboards with 2.5 in., 3 in., and 3.5 in. gearcases from all engine manufacturers.

Turning Point Propellers 21310810 Hustler 3-Blade Propellers for 25-75 HP Engines with 3.5 in. Gearcase is a right hand propeller and has a 12.5 in. Dia and a 8 in. pitch. Turning Point has built their reputation on a relentless focus on engineering the best performing aluminum propellers in the World. Utilizing state-of-the-art Squeeze Casting technology, they produce Hustler 3 Blade Propellers that run as fast as their competitors' Stainless Steel Props, and even sometimes faster. Super stiff metallurgy, unique blade geometry, aggressive pitch, rake, and cup all give you the best they can offer: Stainless Performance at Aluminum Prices. Not only does top speed, handling and hole shot improve, but also mid-range performance, which will save you a ton in gas usage. If you want the most your boat and engine combination can offer, then the Hustler 3 Blade delivers. The Three Blade Hustler is great for boaters looking to get the most top end out of their boat, and offer excellent bow lifting capabilities. These props are perfectly matched to mid-range horsepower pontoons, fishing, ribs, and tiller boats. It will fit all 6-75 HP outboards with 2.5 in., 3 in., and 3.5 in. gearcases from all engine manufacturers.

Turning Point Propellers 21431130 Hustler 4-Blade Propellers for 40-150 HP Engines with 4.25 in. Gearcase is a right hand propeller and has a 14 in. Dia and a 11 in. pitch. The Prop that put the “four” in Performance. Turning Point’s Four Blade Hustler revolutionized the aluminum propeller market when introduced over 6 years ago. No one had ever produced a state-of-the-art Swept Cleaver design for 40-150 HP applications. These props re-wrote the rules, proving that you can run a four blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers’ propellers. These Turning Point props also produced up to 46% more reverse thrust than other comparable designs in recent tests. The Hustler 4 blade series is perfect for any application that demands enhanced acceleration, cornering, and load carrying capabilities. This prop series is ideally suited for watersports, stern drive boats, tri-toons, bay boats, and any vessel that can use stern lift. It is our best upgrade of older aluminum designs from the 70’s, 80’s, 90’s, and ’00’s, and will outrun most newer props, including five blade ski props.

Fits Hustler model Hustler Z, Hustler ATZ and Super Z. Replace Excel Hustler 350595. 6-3/8 in. Overall Height, 6 in. Housing O.D. Cast Iron housing, grease zerk.