Shop for stu drive extractor

This is a stud extractor. It is 3/8 in. Impact gun compatible. Material: Alloy.

Straight pipe extractors are used for removing pieces of broken pipe. Insert the pipe extractor into the hole where the piece of pipe is located, strike the end of the extractor with the hammer until you are sure that the extractor is set, then turn it counter clockwise using an adjustable wrench.

The Makita 18-Volt X2 LXT (36-Volt) Brushless 1-9/16 in. Advanced AVT Rotary Hammer with AWS is a cordless concrete solution that's loaded with advanced engineering for maximum efficiency. Its equipped with Auto-Start Wireless System (AWS) for wireless connectivity with an AWS-equipped dust extractor (sold separately), and features Advanced AVT for reduced vibration. The XRH07PTUN is engineered with Advanced Anti-Vibration Technology (AVT), a synchronized 3-component system for significantly less vibration. AVT is more than just a padded handle. The 3-component system includes an internal counterbalance that uses air pressure to move counterweight pistons in the opposite direction of the drive piston to actively reduce vibration. The result is a low vibration rating of only 5m/s, but with no compromise in performance: The efficient brushless motor delivers a full 8.4 ft. lbs. of impact energy, with 250 RPM to 500 RPM and 1,450 BPM to 2,900 BPM. For improved efficiency, its equipped with Auto-Start Wireless System technology. AWS utilizes Bluetooth technology for wireless communication between the tool and dust extractor (sold separately). When the trigger of the AWS-equipped XRH07PTU is engaged, the AWS-equipped dust extractor powers-up. When the trigger is released, the dust extractor powers-down. AWS is intelligent communication that eliminates cords and excessive noise since the dust extractor runs only when the tool is running.

Makita 18V LXT Brushless Cordless Drywall Sander (XLS01ZX1) delivers increased efficiency and mobility for drywall finishers. The compact and lightweight design makes the XLS01 easier to use for extended periods of time. It delivers up to 35 minutes of run time on a single charge of an 18V 5.0Ah battery (sold separately). Users can match the speed to the application with a variable speed control dial (1,000 - 1,800 RPM), and Constant Speed Control automatically provides additional power to the motor to maintain speed under load for consistent performance. The XLS01ZX1 features a round brush design for efficient dust extraction and minimal leakage.The large, highly flexible head is engineered for increased maneuverability across various wall orientations. The direct-drive BL Brushless Motor eliminates carbon brushes, enabling the motor to run cooler and more efficiently for longer life. The adjustable extension pipe collapses for sanding in confined spaces, such as closets, and extends up to 16-1/2" for reaching high walls and ceilings. The dust brush is removable for seamless flush-to-corner edge sanding.For improved efficiency, it's equipped with Auto-Start Wireless System technology (AWS). AWS utilizes Bluetooth technology for wireless communication between the tool and dust extractor (sold separately). When the trigger of the AWS-equipped XLS01 is engaged, the AWS-equipped dust extractor powers-up. When the trigger is released, the dust extractor powers-down.

The Makita 18-Volt X2 LXT (36-Volt) Brushless 1-9/16 Advanced AVT Rotary Hammer with AWS is a cordless concrete solution that's loaded with advanced engineering for maximum efficiency. Its equipped with Auto-Start Wireless System (AWS) for wireless connectivity with an AWS-equipped dust extractor (sold separately) and features Advanced AVT for reduced vibration. Its powered by two 18-Volt LXT batteries and an efficient brushless motor for maximum power, speed and run-time for corded demands, without the cord. The XRH07PTU is engineered with Advanced Anti-Vibration Technology (AVT), a synchronized 3-component system for significantly less vibration. AVT is more than just a padded handle. The 3-component system includes an internal counterbalance that uses air pressure to move counterweight pistons in the opposite direction of the drive piston to actively reduce vibration. The result is a low vibration rating of only 5m/s, but with no compromise in performance: The efficient brushless motor delivers a full 8.4 ft./lbs. of impact energy, with 250 RPM to 500 RPM and 1,450 BPM to 2,900 BPM. For improved efficiency, its equipped with Auto-Start Wireless System technology. AWS utilizes Bluetooth technology for wireless communication between the tool and dust extractor (sold separately). When the trigger of the AWS-equipped XRH07PTU is engaged, the AWS-equipped dust extractor powers-up. When the trigger is released, the dust extractor powers-down.

The HARVEST LANE HONEY 2 frame stainless steel honey extractor makes extracting honey from medium and large frame easy. The hand crank shaft through the gear box drive spins the frames inside the extractor housing at a high rate of speed, causing centrifugal force to extract the honey from the comb. This process is much faster and cleaner than other methods of extraction.

The 40V max XGT Brushless 12" Dual-Bevel Sliding Compound Miter Saw Kit (GSL04M1) delivers faster and smoother cutting. The rail-forward design maximizes workspace when the miter saw is positioned flush against a wall. The miter saw has a large 3-5/8" x 15" cutting capacity at 90-degrees. The saw miters 0° to 60° left and right and bevels from 0° to 48° (left and right). The efficient brushless motor runs cooler and more efficiently for longer tool life, with direct drive that delivers 3,600 RPM for faster cutting performance, with no belts to slip or replace. Extension wings are included for cutting longer materials, and retract for easier storage. An electric brake provides maximum productivity. An L.E.D. light casts a shadow of the saw blade onto the material for an exact cutting line. For improved efficiency, it is capable of wirelessly starting a connected dust management solution. Auto-start Wireless System (AWS) utilizes Bluetooth technology for wireless communication between the tool and dust extractor (sold separately). When the trigger of the AWS-equipped GSL04M1 is engaged, the AWS-equipped dust extractor powers-up. When the trigger is released, the dust extractor powers-down. AWS is intelligent communication that eliminates cords and excessive noise since the dust extractor runs only when the tool is running. An AWS transmitter is needed (sold separately). This promotion also comes with a bonus BL4040 40V max XGT 4.0Ah Battery.

The 40V max XGT Brushless 12" Dual-Bevel Sliding Compound Miter Saw Kit (GSL04M1) delivers faster and smoother cutting. The rail-forward design maximizes workspace when the miter saw is positioned flush against a wall. The miter saw has a large 3-5/8" x 15" cutting capacity at 90-degrees. The saw miters 0° to 60° left and right and bevels from 0° to 48° (left and right). The efficient brushless motor runs cooler and more efficiently for longer tool life, with direct drive that delivers 3,600 RPM for faster cutting performance, with no belts to slip or replace. Extension wings are included for cutting longer materials, and retract for easier storage. An electric brake provides maximum productivity. An L.E.D. light casts a shadow of the saw blade onto the material for an exact cutting line. For improved efficiency, it is capable of wirelessly starting a connected dust management solution. Auto-start Wireless System (AWS) utilizes Bluetooth technology for wireless communication between the tool and dust extractor (sold separately). When the trigger of the AWS-equipped GSL04M1 is engaged, the AWS-equipped dust extractor powers-up. When the trigger is released, the dust extractor powers-down. AWS is intelligent communication that eliminates cords and excessive noise since the dust extractor runs only when the tool is running. An AWS transmitter is needed (sold separately).

The 40V max XGT Brushless 12" Dual-Bevel Sliding Compound Miter Saw (GSL04Z) delivers faster and smoother cutting. The rail-forward design maximizes workspace when the miter saw is positioned flush against a wall. The miter saw has a large 3-5/8" x 15" cutting capacity at 90-degrees. The saw miters 0° to 60° left and right and bevels from 0° to 48° (left and right). The efficient brushless motor runs cooler and more efficiently for longer tool life, with direct drive that delivers 3,600 RPM for faster cutting performance, with no belts to slip or replace. Extension wings are included for cutting longer materials and retract for easier storage. An electric brake provides maximum productivity. An L.E.D. light casts a shadow of the saw blade onto the material for an exact cutting line. For improved efficiency, it is capable of wirelessly starting a connected dust management solution. Auto-start Wireless System (AWS) utilizes Bluetooth technology for wireless communication between the tool and dust extractor (sold separately). When the trigger of the AWS-equipped GSL04Z is engaged, the AWS-equipped dust extractor powers-up. When the trigger is released, the dust extractor powers-down. AWS is intelligent communication that eliminates cords and excessive noise since the dust extractor runs only when the tool is running. An AWS transmitter is needed (sold separately).

Nothing is more frustrating than when work is brought to a halt when a screw or bolt breaks on the job. We now have a solution for you with the Rennsteig double-edged bolt extractors, which represent a new generation of tools to easily remove damaged screws and bolts. With the German quality, reusable double-edged bolt extractors that make 8 points of contact and can be used for both left and right handed threads, you can now save the day and get back to work in just 5 easy steps. First, mark the center point for your drill hole using the tip on the extractor. Second, drill a hole in the bolt. Third, drive the bolt extractor into the bore hole until the cutting edges are in full contact with the bolt. Fourth, use a wrench, pliers or socket to remove the bolt out of the thread hole. Lastly, after unscrewing, remove the damaged screw or bolt from the extractor. With multiple sizes available these screw extractors are ideal to have on hand in order to be prepared for the unexpected broken bolt or screw.