Shop for rope logic isc rp052 aluminum ton

1/2 in. (13 mm) x 10 ft. wirecore rope lanyard. Made in-house by ROPE LOGIC. A Petzl Micrograb is attached to the lanyard. A steel snaphook is spliced at 1 end with an eyelet at the other end. Material: Nylon.

Versitile and lightweight with a 10 ft. L, this could become your primary lanyard. Constructed with 1/2 in. (13mm) x 10 ft. 16-strand Lightning Green rope & grizzly spliced in-house by ROPE LOGIC. Includes 2 x aluminum snaps and a Tenex 3/8 in. x 19 in. prusik cord with aluminum snap hook. Material: Nylon.

1/2 in. (13 mm) x 10 ft. swage pressed wirecore lanyard has steel snaps at either end. Adjusts with prusik having single locking aluminum snap and is made in-house by ROPE LOGIC. The ends of this wire-core lanyard are hydraulically pressed inside stout metal sleeves that retain approximately 100% of the wire's rated strength. Material: Nylon.

ROPE LOGIC Wire Core Lanyard is built-in the ROPE LOGIC splice shop, this rope-covered wire lanyard allows smooth use of various rope grab devices and prusik configurations to provide climbers unique protection while aloft. The improved swaging process includes the rope covering in the splice for greater security and overall product life. Meets all applicable OSHA regulations, Swage exceeds 6,000 lbs. strength, the rope splice adds redundant security to core and cannot slide off cable. Material: Steel.

The much requested block version of the ROPE LOGIC Ultra Sling. This version is made with 12 strand 3/4 in. Samson Tenex Tec rope. A rigging block is installed and captured in the terminal eye of the sling. This rigging sling easily adjusts in length using the spliced pockets located at fixed intervals. 6 consecutive 8 in. pockets, 6 ft. usable length, 7 ft. overall length. Only designed for use in choked configuration and will fit most blocks with exceptions CMI RP146 (1 in. Blue) and ISC RP57 (Yellow). Blocks verified to fit: CMI: RP130, RP131, RP145, DMM: Large (3/4 in. with hole), Small (5/8 in. no hole), ESA 3/4 in., ISC: Red and Blue Rigging blocks (RP055, RP054, RP053, RP052, RP051, RP050), Flame (RP056), Stein: 5/8 in. Block. Tensile Strength: 21,000 lbs. (93.4 kN), Working Load Limit: 2100 lbs. (9.3 kN). Material: Nylon.

A Red RP052 ISC Aluminum 2.4 Ton Block is installed and captured in the terminal eye of the sling of 3/4 in. x 12 ft. Tenex rope. The Tenex rope is a high-strength, low-stretch rope specifically designed for splicing. It weighs 6.18 lbs. Material: Nylon.

The much requested "block version" of the ROPE LOGIC Ultra Sling. This version is made with 12 strand 5/8 in. Samson Tenex Tec rope. A rigging block is installed and captured in the terminal eye of the sling. Will fit most smaller blocks [Exceptions CMI RP146 (1 in. Blue), ISC RP57 (Yellow), DMM Impact Large]. Blocks verified to fit: CMI: RP130, RP131, RP145, DMM: Small (5/8 in. no hole), ESA 3/4 in., ISC: Red & Blue Rigging blocks (RP055, RP054, RP053, RP052, RP051, RP050), Flame (RP056), Stein: 5/8 in. Block. This rigging sling easily adjusts in length using the spliced pockets located at fixed intervals. It is 7 feet overall length with 6 ft. of usable sling length. The choked configuration tensile strength is 18,000 lbs. (80 kN). The working load limit is 1800 lbs. (8 kN). It is only designed for use in choked configuration. Material: Nylon.

M18 18-Volt Lithium-Ion FORCE LOGIC 12 Ton Cordless Utility Crimper (Tool-Only).

M18 18V Lithium-Ion Cordless FORCE LOGIC 12 Ton Utility Crimper with M18 7/16 in. Hex High Torque Impact Wrench.

Ultimate ease of adjustability meets rigging redirect. Multiple pockets on the ROPE LOGIC tREX Ultra Ring Sling allows for hassle free, knot free, adjustment. Now with the hi-vis Teufelberger tREX line, the Ultra Ring Sling has a supple feel, excellent abrasion resistance and a wax coating to prevent picking. Spliced by the experts at ROPE LOGIC, this sling is sure to become your new best friend. Tensile strength 17,100 lbs. in choked configuration. Material: Polyester.