Shop for quicksilver black diamond 3 blade aluminum propelle

This iLIVING 30 inch Commercial Pedestal fan is designed to move high volumes of air for offices, factories, warehouses, loading docks, and auto shops. This fan has a 3-blade aluminum propeller and the fan housing is constructed of heavy-duty steel with powder-coated wire guards in compliance with the United States OSHA Standard 1910.212, 1/2". UL & cUL Listed. Specifications: Blade Dia.30", 120 Volts, 220 Watts, Phase 1, Hz60, HIGH CFM 7261, Motor HP 1/4, Motor RPM 1113/902, Operating Amps 3.4/2.0, Air Velocity (FPM) at 10 Ft.1010. Color: Black.

Exclusive squeeze cast process. Stronger blades with better performance. RUBEX 3 has outstanding acceleration and top speed. REQUIRES RBX HUB KIT (Sold separately), SEE APPLICATION CHART OR VISIT www. rubexprops. com. For Solas Dual Prop and B3 installations, front and rear propellers must both be manufactured by Solas. Also, they must be made of the same material: either aluminum or stainless steel but not both. Special tools may be required to install Dual Props. Please consult OEM manual for proper installation and torque specs. Disclaimer: Pitch estimates and propeller selections made by this prop finder are provided only as a general reference and may not be correct for specific boats under actual boating conditions. By using this prop finder, you agree that the Solas Science and Engineering Company, Ltd, its dealers and other host entities do not accept any liability and are not responsible for harm to persons or property, damages or costs caused by the installation, handling or use of an indicated propeller or hardware. Refer to your engine's Owners Manual for important safety precautions when installing a propeller. A new propeller's hub and blades must be checked for sufficient lower unit and trim tab clearances before use. Engine manufacturer recommends greasing the propeller shaft every 12 months.

Exclusive squeeze cast process. Stronger blades with better performance. RUBEX 3 has outstanding acceleration and top speed. REQUIRES RBX HUB KIT (Sold separately), SEE APPLICATION CHART OR VISIT www. rubexprops. com. For Solas Dual Prop and B3 installations, front and rear propellers must both be manufactured by Solas. Also, they must be made of the same material: either aluminum or stainless steel but not both. Special tools may be required to install Dual Props. Please consult OEM manual for proper installation and torque specs. Disclaimer: Pitch estimates and propeller selections made by this prop finder are provided only as a general reference and may not be correct for specific boats under actual boating conditions. By using this prop finder, you agree that the Solas Science and Engineering Company, Ltd, its dealers and other host entities do not accept any liability and are not responsible for harm to persons or property, damages or costs caused by the installation, handling or use of an indicated propeller or hardware. Refer to your engine's Owners Manual for important safety precautions when installing a propeller. A new propeller's hub and blades must be checked for sufficient lower unit and trim tab clearances before use. Engine manufacturer recommends greasing the propeller shaft every 12 months.

Exclusive squeeze cast process. Stronger blades with better performance. RUBEX 3 has outstanding acceleration and top speed. REQUIRES RBX HUB KIT (Sold separately), SEE APPLICATION CHART OR VISIT www. rubexprops. com. For Solas Dual Prop and B3 installations, front and rear propellers must both be manufactured by Solas. Also, they must be made of the same material: either aluminum or stainless steel but not both. Special tools may be required to install Dual Props. Please consult OEM manual for proper installation and torque specs. Disclaimer: Pitch estimates and propeller selections made by this prop finder are provided only as a general reference and may not be correct for specific boats under actual boating conditions. By using this prop finder, you agree that the Solas Science and Engineering Company, Ltd, its dealers and other host entities do not accept any liability and are not responsible for harm to persons or property, damages or costs caused by the installation, handling or use of an indicated propeller or hardware. Refer to your engine's Owners Manual for important safety precautions when installing a propeller. A new propeller's hub and blades must be checked for sufficient lower unit and trim tab clearances before use. Engine manufacturer recommends greasing the propeller shaft every 12 months.

Turning Point Propellers EX1/EX2-1315 Express 3-Blade Stainless Steel Propeller for 40-150 HP Engines with 4.25 in. Gearcase is a right hand propeller and has a 13.75 in. Dia and a 15 in. pitch. Utilizing almost 40 years of race boat and high performance prop design expertise, our Express Mach3 series of props captures all the best techniques and technologies available to get the most out of your boat. Aggressive pitch angles, radical designs, sharp cup profiles. These three blade propellers excel at achieving maximum speed, while delivering Best-in-Class handling and acceleration. Hole Shot, Got it, and hang on. Cornering, We've got that, too. Top Speed, We say "No Faster Prop on the Water" for a reason. Upgrading your current propeller from aluminum to stainless steel, or from an old generation design to the latest technology, Express Mach3 Propeller is the best investment in boat improvement you can make. Today's New Designs will run circles around the competition, and can make dramatic improvements in boat performance. The gain in fuel economy can often pay for the cost of a new propeller in one or two seasons, making it a sound investment in your time on the water.

Turning Point Propellers 31511910 Express 3 Blade Stainless Steel Propeller for 150-300+ HP Engines with 4.75 in. Gearcase is a right hand propeller and has a 15.6 in. Dia and a 19 in. pitch. Utilizing almost 40 years of race boat and high performance prop design expertise, our Express Mach3 series of props captures all the best techniques and technologies available to get the most out of your boat. Aggressive pitch angles, radical designs, sharp cup profiles. These three blade propellers excel at achieving maximum speed, while delivering Best-in-Class handling and acceleration. Hole Shot, Got it, and hang on. Cornering, We've got that, too. Top Speed, We say "No Faster Prop on the Water" for a reason. Upgrading your current propeller from aluminum to stainless steel, or from an old generation design to the latest technology, Express Mach3 Propeller is the best investment in boat improvement you can make. Today's New Designs will run circles around the competition, and can make dramatic improvements in boat performance. The gain in fuel economy can often pay for the cost of a new propeller in one or two seasons, making it a sound investment in your time on the water.

Turning Point Propellers H1-1013 Hustler 3-Blade Aluminum Propeller for 6-74 HP Engines with 3.5 in. Gearcase is a right hand propeller and has a 10.5 in. Dia and a 13.5 in. pitch. Turning Point has built their reputation on a relentless focus on engineering the best performing aluminum propellers in the World. Utilizing state-of-the-art Squeeze Casting technology, they produce Hustler 3 Blade Propellers that run as fast as their competitors' Stainless Steel Props, and even sometimes faster. Super stiff metallurgy, unique blade geometry, aggressive pitch, rake, and cup all give you the best they can offer: Stainless Performance at Aluminum Prices. Not only does top speed, handling and hole shot improve, but also mid-range performance, which will save you a ton in gas usage. If you want the most your boat and engine combination can offer, then the Hustler 3 Blade delivers. The Three Blade Hustler is great for boaters looking to get the most top end out of their boat, and offer excellent bow lifting capabilities. These props are perfectly matched to mid-range horsepower pontoons, fishing, ribs, and tiller boats. It will fit all 6-75 HP outboards with 2.5 in., 3 in., and 3.5 in. gearcases from all engine manufacturers.

Turning Point Propellers 21431130 Hustler 4-Blade Propellers for 40-150 HP Engines with 4.25 in. Gearcase is a right hand propeller and has a 14 in. Dia and a 11 in. pitch. The Prop that put the “four” in Performance. Turning Point’s Four Blade Hustler revolutionized the aluminum propeller market when introduced over 6 years ago. No one had ever produced a state-of-the-art Swept Cleaver design for 40-150 HP applications. These props re-wrote the rules, proving that you can run a four blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers’ propellers. These Turning Point props also produced up to 46% more reverse thrust than other comparable designs in recent tests. The Hustler 4 blade series is perfect for any application that demands enhanced acceleration, cornering, and load carrying capabilities. This prop series is ideally suited for watersports, stern drive boats, tri-toons, bay boats, and any vessel that can use stern lift. It is our best upgrade of older aluminum designs from the 70’s, 80’s, 90’s, and ’00’s, and will outrun most newer props, including five blade ski props.

OEM 48-8M0084495 Outboard Propeller. While boats have multiple parts that contribute to their effectiveness, none are more critical than the propeller. Our 14 in. Dia x 19 in. pitch outboard propeller can directly replace OEM 48-8M0084495, compatible with the 135-300HP 2-Stroke and 4-Stroke outboards, Alpha and Bravo I Sterndrives. The propeller is constructed of sturdy aluminum alloy, guaranteeing that this boat propeller is durable enough for extended service life.

Each Solas boat propeller is balanced and precision made with superior materials for a higher strength and thinner blade that is smooth, fast, efficient and tough. Solas aluminum propellers are squeeze-cast and coated with 4 paint layers. The Amita 3 Plus propeller offers a larger blade than the Amita 3 for superior thrust and is suitable for heavy boats. All Amita models feature a stronger blade with better performance with outstanding acceleration and top speed. 15.8 in. Dia. 15 in. Pitch. Right Hand Rotation.