Shop for powertec 70149 p2 inch dust control flex cuff

Introducing 4" Dust Collection Hose 90° Elbow Connector with Blast Gate and Dust Control Flex Cuff Set by POWERTEC. 【4-Inch 90° Elbow Dust Hose Connector】 ✔This 4 in. elbow connector facilitates directional changes in your dust collector hose network to maximize the system efficiency and effectiveness. With its airtight friction grip, this durable connector will ensure that potent dust and debris is extracted sucked straight into your dust collector, and that clear, clean air is returned into your workshop environment. Make it perfect with POWERTEC fittings - streamlined, simple to use, versatile! 【4-Inch Dust Control Flex Cuff with Hose Clamps】 ✔This coupler is designed to provide you with an airtight connection between a pair of 4 in. dust collection fittings or hoses. And it comes equipped with standard hose clamps so that you won't need unattractive duct tape or a messy assortment of screws. It's a highly useful (and reusable) dust collection system accessory, as it allows you to interchange fittings and connect adapters to keep all of your dust collection tools connected. 【4 in. ABS Plastic Blast Gate】 ✔This manual blast gate helps maximize your dust collection system by regulating proper air flow to your designated machine of choice. Acting as an in-line gate to control the vacuum flow to specified areas of your work shop, it's designed to work seamlessly with a variety of flexible hoses, ducts, and 4-inch ports for an assortment of popular brands.

Introducing the 4 in. Dust Control Flex Cuff with Hose Clamps by POWERTEC. This coupler is designed to provide you with an airtight connection between a pair of 4 in. dust collection fittings or hoses. And it comes equipped with standard hose clamps so that you won't need unattractive duct tape or a messy assortment of screws. It's a highly useful (and reusable) dust collection system accessory, as it allows you to interchange fittings and connect adapters to keep all of your dust collection tools connected. These Flex Cuffs work exclusively with nominal 4-Inch O.D. ports, hoses and fittings. It's made with high quality rubber to ensure long-term durability and possesses a flexible profile capable of conforming to the narrow range of sized ports. Application: Connected 4 inch PVC pipe to 4 in. blast gate, Joined a table saw to a dust sheriff as a temporary solution, Connected a 4 in. table saw sawdust exit to a shop vac adapter, Used along with the POWERTEC 4 in. Reducer to connect a shop vac to planer.

Introducing the 4" to 2-1/2" Cone Reducer by POWERTEC. This limited adapter was designed to provide you with a simple solution to coupling your 4-inch ID dust hoses with 2-1/2 ID dust hoses. Specifically, it allows you to step down from a larger main line to a smaller branch line without compromising air velocity or the effectiveness of your dust collection system. It features a premium, heavy walled ABS plastic construction made for durability and to withstand the wear & tear commonly associated with woodworking dust collection. It's extremely easy-to-use and doesn't require messy tape or additional equipment. 【PLEASE NOTE】This reducer is NOT intended to be used for a direct connection to your dust collector or shop vac OD ports. It fits and accommodates hoses ONLY. If you are in need of an adapter that connects directly to your 4" dust collection equipment port, you will also require the following item: POWERTEC 70149 4" Flex Cuff with Hose Clamp (sold separately). To make a direct connection between a 4" port to another 4" port, the following adapter may be a better alternative: POWERTEC 70171 Threaded Quick Coupler (sold separately).

Introducing the 4 in. to 2-1/2 in. Cone Reducer by POWERTEC. This limited adapter was designed to provide you with a simple solution to coupling your 4-inch ID dust hoses with 2-1/2 ID dust hoses. Specifically, it allows you to step down from a larger main line to a smaller branch line without compromising air velocity or the effectiveness of your dust collection system. It features a premium, heavy walled ABS plastic construction made for durability and to withstand the wear & tear commonly associated with woodworking dust collection. It's extremely easy-to-use and doesn't require messy tape or additional equipment. 【PLEASE NOTE】This reducer is NOT intended to be used for a direct connection to your dust collector or shop vac OD ports. It fits and accommodates hoses ONLY. If you are in need of an adapter that connects directly to your 4 in. dust collection equipment port, you will also require the following item: POWERTEC 70149 4 in. Flex Cuff with Hose Clamp (sold separately). To make a direct connection between a 4 in. port to another 4 in. port, the following adapter may be a better alternative: POWERTEC 70171 Threaded Quick Coupler (sold separately).

The 4 in. x 20 ft. PVC Dust Collector Hose - POWERTEC 70143. A practical, safe and cost effective dust collection hose designed to enhance your existing workshop dust collection and filtration systems. Innovative Design: Features Flaunts an impressively translucent body, reinforced by interior spiral spring steel wire allowing you to monitor your air movement performance, debris collection and fine dust separation/ filtration. Introducing the 4 in. to 2-1/2 in. Cone Reducer by POWERTEC. This limited adapter was designed to provide you with a simple solution to coupling your 4 in. ID dust hoses with 2-1/2 ID dust hoses. Specifically, it allows you to step down from a larger main line to a smaller branch line without compromising air velocity or the effectiveness of your dust collection system. It's extremely easy-to-use and doesn't require messy tape or additional equipment. PLEASE NOTE: This reducer is NOT intended to be used for a direct connection to your dust collector or shop vac OD ports. It fits and accommodates hoses ONLY. If you are in need of an adapter that connects directly to your 4 in. dust collection equipment port, you will also require the following item: POWERTEC 70149 4 in. Flex Cuff with Hose Clamp (sold separately). To make a direct connection between a 4 in. port to another 4 in. port, the following adapter may be a better alternative: POWERTEC 70171 Threaded Quick Coupler (sold separately).

Introducing Dust Collection Set by POWERTEC. The 4 in. to 2-1/2 in. Dust Collection Cone Reducer - This limited adapter was designed to provide you with a simple solution to coupling your 4 in. ID dust hoses with 2-1/2 ID dust hoses. Specifically, it allows you to step down from a larger main line to a smaller branch line without compromising air velocity or the effectiveness of your dust collection system. The 4 in. x 20 ft PVC Hose and Key Hose Clamp Kit - This convenient assortment was designed to provide you with a high quality hose and clamp combo - perfect for your workshop dust collection system. It features a clear (transparent) dust collection hose that allows you to monitor dust & debris separation and vapor & smoke filtration. The 4 in. Dust Control Flex Cuff with Steel Clamps - The POWERTEC Dust Control Flex Cuff with Hose Clamps, 4-Inch, delivers an airtight connection from one dust-collection fitting to another of comparable size, while eliminating the need for flimsy duct tape connections or other permanent fasteners. Firm yet pliable rubber construction allows enough flexibility to bridge slight diameter differences in hose or tubing. Pre-molded indents on the cuff allows for easy, airtight clamp installation. Handy set includes one rubber cuff and 2 steel hose clamps.

Introducing the 4" x 36" Long Clear Pipe by POWERTEC. It is made with top grade PVC plastic and was designed to work with hoses and/or ports with 4 in. ID. A light-weight and rigid profile ideal for an assortment of dust collection system and woodworking applications. It's tough, stable and features exceptional impact resistance for day to day usage. You can use the POWERTEC Dust Control Flex Cuff with Clamps (70149) to join lengths of pipe or to accommodate adapters, connectors and other fittings with a 4 in. outer diameter for quick, easy and seamless adaptability. Introducing the Dust Collector Hose Hangers by POWERTEC. These hose hanger screw down clamps are designed to give your clear pipes, conduits and dust collection hoses a sturdy and secure mounting option. Perfect for ceilings, walls, under benches and more - each bracket is made with premium quality 24 gauge stainless steel and are ready to fit snugly around your 4 in. fittings to deliver firm mounting support.

Introducing the 4 in. x 36 in. Long Clear Pipe by POWERTEC. Our clear plastic PVC pipe providing a highly efficient extension tube or foundation for your dust collection system. It is made with top grade PVC plastic, and was designed to work with hoses and/or ports with 4 in. ID. A lightweight and rigid profile ideal for an assortment of dust collection system and woodworking applications. It's tough, stable and features exceptional impact resistance for day to day usage. You can use the POWERTEC Dust Control Flex Cuff with Clamps (70149) to join lengths of pipe or to accommodate adapters, connectors and other fittings with a 4 in. outer diameter for quick, easy and seamless adaptability. Introducing the 4 in. Dust Control Flex Cuff with Hose Clamps by POWERTEC. This coupler is designed to provide you with an airtight connection between a pair of 4 in. dust collection fittings or hoses. And it comes equipped with standard hose clamps so that you won't need unattractive duct tape or a messy assortment of screws. It's a highly useful (and reusable) dust collection system accessory, as it allows you to interchange fittings and connect adapters to keep all of your dust collection tools connected. These Flex Cuffs work exclusively with nominal 4 in. O.D. ports, hoses and fittings. It's made with high quality rubber to ensure long-term durability and possesses a flexible profile capable of conforming to the narrow range of sized ports.

Introducing the 6 in. Dust Control Flex Cuff with Hose Clamps by POWERTEC. This coupler is designed to provide you with an airtight connection between a pair of 6" dust collection fittings or hoses. And it comes equipped with standard hose clamps so that you won't need unattractive duct tape or a messy assortment of screws. It's a highly useful (and reusable) dust collection system accessory, as it allows you to interchange fittings and connect adapters to keep all of your dust collection tools connected. Compatibility These Flex Cuffs work exclusively with nominal 6 inch O.D. ports, hoses and fittings. Construction It's made with high quality rubber to ensure long-term durability and possesses a flexible profile capable of conforming to the narrow range of sized ports. Our Customers Have: Connected 6-Inch PVC pipe to 6 in. blast gate, Joined a table saw to a dust sheriff as a temporary solution, Connected a 6 in. table saw sawdust exit to a shop vac adapter, Used along with the POWERTEC 6 in. Reducer to connect a shop vac to planer.

Introducing POWERTEC Big Gulp Dust Hood with 4 in. Flex Cuff and 4 in. to 2-1/2 in. Reducer. The POWERTEC gulp dust hood is the perfect solution for catching dust, chips and debris from your machine. It can be used on your chop saw, table saw, lathe, drill press and other machines. Create a cleaner, healthier shop environment with this essential component; it's the ideal dust/chip collection accessory! POWERTEC Dust Control Flex Cuff with Hose Clamps, 4-Inch, delivers an airtight connection from one dust-collection fitting to another of comparable size, while eliminating the need for flimsy duct tape connections or other permanent fasteners. Firm yet pliable rubber construction allows enough flexibility to bridge slight diameter differences in hose or tubing. Pre-molded indents on the cuff allows for easy, airtight clamp installation. Handy set includes one rubber cuff and 2 steel hose clamps.