Shop for powercool w400 220 volt water cooler

The PowerCool W400 model is a powerful cooler, and designed to be stacked or nested with the PowerTIG 315LX, PowerTIG 350EXT, PowerMTS 252STi, and PowerMTS 400 welders. The unit operates on the 240V plug that is offered on the rear of these units. The PowerCool W400 features quick disconnect front fittings for rapid connection. They are color-coded quick connect fittings which allow quick swaps. Material: Metal.

The Mineral and Scale Eliminations System is the best product on the market for preventing scale and mineral buildup in your evaporative cooler. It does this by automatically flushing out the cooler's old water at regularly timed intervals. Without it, scale will continually build up in the cooler pads, restricting the flow of cool air. This system ensures against this by regularly flushing the old water out through the cooler drain and replenishing the cooler with fresh water. This 115-Volt system does not replace the regular pump but works alongside it.

The 1/2 HP Motor Kit contains the following components: 115-Volt 1/2 HP, 2-speed evaporative cooler motor; 3-1/2 in. x 1/2 in. adjustable motor pulley; 2 motor clamps; 36 in. motor cord. The Dial 1/2 HP Evaporative Cooler Motor is built for reliable performance in 115-Volt evaporative coolers. It can be used in a new cooler or as a replacement motor for an existing unit. When selecting the HP for an evaporative cooler motor, always follow the cooler manufacturer's recommendation.

The 1/3-HP Motor Kit contains the following components: 115-Volt 1/3-HP, 2-speed evaporative cooler motor; 3-1/4 in. x 1/2 in. adjustable motor pulley; 2-motor clamps ; 36 in. motor cord. The Dial 1/3-HP Evaporative Cooler Motor is built for reliable performance in 115-Volt evaporative coolers. It can be used in a new cooler or as a replacement motor for an existing unit. When selecting the HP for an evaporative cooler motor, always follow the cooler manufacturer's recommendation.

The 3/4 HP Motor Kit contains the following components: 115-Volt 3/4 HP, 2-speed evaporative cooler motor; 3-3/4 in. x 1/2 in. adjustable, cast iron motor pulley; 2 motor clamps; 36 in. motor cord. The Dial 1/2 HP Evaporative Cooler Motor is built for reliable performance in 115-Volt evaporative coolers. It can be used in a new cooler or as a replacement motor for an existing unit. When selecting the HP for an evaporative cooler motor, always follow the cooler manufacturer's recommendation.

Our new 240V water cooler is designed to work with our latest generation of AHP TIG Welders to provide maximum cooling capacity. This includes the AlphaTIG 203Xi, and Alpha TIG 225Xi.The unit uses a special plug, designed to be used with the rear receptacle on the AlphaTIG 203Xi and 225Xi models.This unit is equipped with a audio/visual flow alarm. The flow alarm can be turned on or off depending upon the requirement.The Single shaft design means the fan and the pump are direct driven by a sealed industrial motor. The cooler is also equipped with a copper cored radiator for long life and better cooling.The unit is equipped with color coded Quick connect couplings for water lines that are designed to be used with the torches supplied by AHP. This greatly simplifies change over and reduces changeover time if a torch needs to be swapped. Make sure to pair the Water Cooler with an AHP compatible Water Cooled TIG Torch with a 35-70 DINSE Connection or use similar adapters for aftermarket torches.Don't forget that the Chill Master 300 carries a 3-year parts and labor warranty.IMPORTANT: Use only TIG rated coolant. In addition the coolant should be designated as "low conductivity" or "safe for HF TIG use". Do not use automobile coolant or coolant rated for MIG or Plasma cutting only. AHP currently does not supply coolant, however it is available at most welding supply stores in almost all areas. Material: Metal.

The Power Cool W300 240-Volt water cooler from Everlast is designed to work with Everlast TIG welders to provide the maximum cooling capacity and includes a special 240-Volt plug for the socket on the Everlast welder rear panel. This plug may be removed or changed for applications with other brands of welders. The unit features color coded quick connectors for rapid and correct connection of the torch lines. The radiator is made from copper for maximum cooling capability. The Italian made pump is made from stainless steel with a bronze impeller for maximum wear ability. The Italian industrial motor is sealed for best protection from the elements. The standard unit is 240-Volt. 120-Volt is available for other units with 120-Volt requirements. A generous reservoir holds just a little over 2 gal. of coolant for maximum circulation capacity. Use only distilled water or antifreeze specifically designed for use with TIG/MIG torch coolers. Do not use automotive anti-freeze.

The PowerCool W350 120-Volt water cooler from Everlast is designed to work with 120-Volt input to suit the requirements of Miller, Lincoln, Thermal Arc, ESAB and other similar TIG welders to provide the maximum cooling capacity up to 350 Amp of power. The unit features left hand 5/8 in.-18 LH fittings for standard type connection of TIG water lines. An alarm indicates lack of flow or water level issues to help protect the torch and prevent disasterous (and expensive) torch meltdowns when armed. The radiator is made from copper for maximum cooling capability. The Italian made pump is made from stainless steel with a bronze impeller for maximum wearability. The Italian industrial motor is sealed for best protection from the elements. A generous reservoir holds just a little over 2.2 Gal. of coolant for maximum circulation capacity. Use only distilled water or antifreeze specifically designed for use with TIG/MIG torch coolers. Do not use automotive anti freeze. Use approved TIG coolant only.

TIG Welder Water Cooler. This powerful cooling water cooler from VEVOR is designed to work with TIG welders and provide maximum cooling capacity. The unit features color coded quick connectors for rapid and correct connection of the torch lines. The radiator is made from copper for maximum cooling capability. Material: Polypropylene.

UL11000 230-Volt premium evaporative cooler pump is UL classified for safety and designed for use in 230-Volt evaporative coolers rated up to 11,000 CFM of air delivery. This pump also features a low-level design to ensure normal operation even if the cooler's water level drops to as low as 1/2 inch. The powerful dual coil concentric motor pumps 420 GPH at a head height of 1 foot. Due to its voltage and plug configuration, this pump is typically not used in residential coolers. The UL11000 230-Volt Pump is orange and gray in color.