Shop for plasma cutting electrode for 302 303 317 and

Using severely worn consumables can not only ruin a good piece of metal, it can cause expensive torch failures and unnecessary down time. Using incorrect consumables can lead to shortened parts life and reduced cut quality. This part is made for Forney 302, 303,317 and 251 Plasma Cutters. Material: Brass.

This set includes an approximate 13 ft. L pilot arc plasma cutting torch with 5-prong connection and a connection safe protector. It is applicable for Brown Color Lotos plasma cutters LTPDC2000D. Cannot used for Red Color LTPDC2000D. This set of plasma cutting torch may not be used for other plasma cutter models and/or brands. Lotos LTPDC2000D should use only Lotos Technology factory manufactured genuine accessories.

Looking for an efficient way to cut sheet metal, heavy-gauge steel, copper, iron, and aluminum up to 3/4 in. thick The T33938 60-Amp Plasma Cutter allows you to complete fabrication and specialty cutting tasks. With inverter technology and a high frequency start, this 60A plasma cutter makes it easy to cut through materials with an uneven surface up to 3/4 in. thick. That allows you to complete unique projects without delays. The amperage is simple to adjust with just a turn of the dial; adjust as frequently as needed during your cutting operations. Turn it up to cut through thick material. Dial it in so the sparks and dross blow out the bottom of your workpiece. A built-in pressure regulator allows you to set the airflow to just the right level, with a gauge for constant monitoring. Plasma cutters do have consumable components that need periodic replacing. Replacement components for the T33938 include the T33999 Electrode, T34000 60A Nozzle, T34001 Ceramic Shield, and the T34002 Replacement Cutting Torch. SPECIFICATIONS: Power requirement: 220-Volt, Single-phase, 60 HzMinimum circuit size: 50AOutput current range: 20-60ADuty cycle: 60% at 60AMaximum material thickness: 3/4 in. Air requirement: 5 CFM at 80 PSIAir fitting: NPT 1/4 in. Torch cable length: 13 ft. Ground cable length: 8 ft. Protection class: IP21SOverall dimensions: 8 in. W x 20-1/2 in. D x 14-1/2 in. HApproximate shipping weight: 42 lbs.

RIDGID replacement plasma cutter air diffuser helps to extend the life of plasma consumables. Durable ceramic construction spirals air flow around the electrode for long lasting performance. Comes in a replacement 1-pack. This products fits the RIDGID 20 P plasma cutter and most other 20 Amp and below plasma cutters.

Specifications - Type: Plasma Cutter, TIG-Torch, Stick/Arc 3-in-1 Combo Welding. Supply Power: 115V/230V/60Hz/1-Phase. Current Range: Plasma Cutter: 230V/15-40A & 115V/15-33A. TIG Torch: 230V/5-180A & 115V/15-140A. STICK ARC: 230V/15-160A & 115V/15-130A, Output,104F(40C): Plasma Cutter: 40A/96V, TIG Torch: 180A/17.2V, STICK ARC: 160A/26.4V. Rated Input Current: Plasma Cutter: 20.8A/230V & 33.1A/115V, TIG Torch: 16.8A/230V & 23.7A/115V, STICK ARC: 22.9A/230V & 35.6A/115V, Duty Cycle: Plasma Cutter: 60% at 40A & 100% at 29.6A, TIG Torch: 60% at 180A & 100% at 118.5A, STICK ARC: 60% at 160A & 100% at 118.5A, Nominal DC Open Circuit Voltage: 58V, Efficiency: 85%, Power factor: 0.93, Output Terminal Type: Direct Wire, Cooling Method: Fan Air Cooled. Includes: 13 Feet (PT-31/LG-40) Plasma Cutter Gun with Assembly, 13 Feet (WP-17) TIG Torch Gun with Assembly, 11 Feet 500A Electrode Holder with Cable, 11 Feet 630A Work Clamp with Cable, 8 Feet Argon Gas Hose, 115V & 230V Transfer Plug, 2 Pieces Tungsten Needles 1/16 in., 2 Pieces Tungsten Needles 5/64 in., 2 pieces Electrode 1/8 in., 2 pieces Electrode 5/32 in.

Specifications: Type: Plasma Cutter, HF-TIG, Stick/Arc 3-in-1 Combo Welding. Supply Power: 110/220V, 50/60Hz, 1-Phase. Welding current Range: Plasma Cutter: 220V/50A & 115V/35A. HF-TIG: 220V/200A & 110V/140A. STICK Arc: 220V/200A & 115V/140A. Welding output,104F: Plasma Cutter: 50A/100V, TIG Torch: 200A/18V, STICK ARC: 200A/28V. Rated Input Current: Plasma Cutter: 27.1A/220V & 35.7A/110V, TIG Torch: 19.6A/220V & 23.7A/110V, STICK Arc: 30.5A/220V & 39.1A/110V. Duty Cycle: Plasma Cutter: 60% at 50A & 100% at 32A, TIG Torch: 60% at 200A & 100% at 126A, STICK Arc: 60% at 200A & 100% at 126A. Nominal DC Open Circuit Voltage: 73V. Efficiency: 85% & Power Factor: 0.93. Output Terminal Type: Direct Wire. Cooling Method: Fan Air Cooled. Plasma Air Supply: Clean Dry Oil-Free Air. Plasma Air Pressure Range: 30-75 psi. Recommended Air Inlet Flow: 4.5scfm at 75 psi. Maximum Severance Cutting Thickness: 1.0 in. Movement Speed: 12.5 in./min. Includes: 13-Feet Plasma Cutter Torch Gun Assembly, 13-Feet High Frequency TIG Torch Assembly, 300-Amp Electrode Holder and 10-Feet Cable, 300-Amp Work Clamp and 10-Feet Cable, 8-Feet Argon Hose and 5/8 inch UNF-18RH, 220V (N6-50R) to 110V (10-30P) Power Adapter, 2 Pieces Tungsten Needles 1/16 in. 2 Pieces Tungsten Needles 3/32 in. 2 pieces Electrode 1/8 in. 2 pieces Electrode 5/32 in. Owner's Manual.

The RIDGID plasma cutting electrodes are made to be used on RIDGID plasma cutter machines and come in a 2-pack. 2 PACK OF Plasma cutter electrode (0.65 millimeters). Made to be used on RIDGID plasma cutter machines. Material: Metal.

The PowerPRO 164 has it all, in one convenient package. With it, you can TIG weld, stick weld, or even plasma cut. It's ideal for applications where space and budget are limitations. It also is ideal for portable repair with the 120-Volt/240-Volt dual voltage design feature. You can even TIG weld aluminum, with the 160-amp AC/DC output. You'll be able to easily cut up to 3/8 in. and sever up to 5/8 in. With stick you'll be able to weld with any size electrode up to 1/8 in. in diameter. The compact size and relatively light weight is due to its advanced IGBT inverter design. All functions are easily accessible with a flip of the switch, and a changeover of the torches and gas supply. AC Frequency and AC balance control extends the capability of the AC TIG feature. It includes nearly everything you need to get started welding and cutting. You'll need filler metal, Argon shielding gas for TIG, Stick welding electrodes for stick, and an air compressor capable of 4.5 CFM at 90 PSI for plasma cutting. Helmet and PPE are not included.

The newest addition to the Husky line of products - the Husky Pioneercut 20P Plasma Cutter. The Husky Plasma Cutter is a must-have for metalwork. The Husky Single Phase Plasma cutter offers 20 AMP, 120 Volt cutting action. The output of the Husky Plasma cutter is 10 - 20 A and the duty cycle of the Husky Plasma Cutter is: 60%@16A and 35%@20A. The Husky Plasma cutter offers Excellent cutting performance with a Quality cutting thickness of 1/4 in. and a Maximum cutting thickness of 5/16 in. The new Husky plasma cutter also features a durable and robust handle, making it extremely portable and suited for on-the-go use. The Husky Single Phase Plasma Cutter also features a power indicator to indicate when the machine is powered on, and an infinite knob to control cutting amperage easily. The Husky Plasma Cutter is the perfect addition to your Husky Tool collection and is a must-have for metalwork.

The Ultra-Arc 205 combines digital reliability and control with a simple, intuitive users interface. As a replacement for the Power-Ultra line of DC TIG, Stick and Plasma multi-process welders, the new Ultra-Arc features improved and additional TIG features, more Stick features, and a stable digitally controlled plasma cutter. As far as TIG features go, it is close in comparison to the top tier DC Power i-TIG 200T. Features are similar, but with a simplified adjustment process for TIG Pulse, featuring 3 field tested Pulse Programs which allow the user to adjust frequency, but rely on solid, proven pre-programmed settings for Pulse Amp and Pulse Time on. This allows almost anyone to operate the pulse with little additional instruction or explanation. In Stick mode, well, adjustable hot start and arc force are 2 popular features that improve stick performance over the older Power-Ultra series with up to 5/32 in. electrode capability (depending upon the class rod, some may only be 1/8 in. max). Of course, with new digital control of the Plasma, cutting quality has been improved over previous models. 2 new features available are a spot timer, and a completely new Fast Tack feature. With the improved design and performance, the Ultra-Arc has no parallel or competition for that matter. Where else will you find a plasma that is capable of cutting up to 3/4 in. included with a DC TIG and Stick welder for a price like this.