Shop for planer helical cutterhead

A powerful, convenient and space-saving combination machine. Most woodworking projects require lumber that is jointed and planed as a starting point. Save time, space and money with a machine that does it all. The G0634X 12 in. 5 HP Planer / Jointer combines a powerful 5 HP motor with a V-helical cutterhead for unmatched finish and long-lasting durability compared to a machine with straight knives. No need to sharpen the blades every time they get dull or nicked. The 48 indexable carbide inserts can be rotated up to 3 times for a new sharp edge. The quick-release fence can be positioned at any angle between 45° and 90° as shown by the tilt scale. The fence has been end-mounted to save space so nothing is protruding from the back of the machine. Conversion from the jointer to the planer is easy. Just remove the quick-release fence and flip up the jointer tables. To use the jointer again, simply release and lower the tables, put the fence back on and you are ready to face or edge joint. The planer features cast-iron infeed and outfeed tables, two feed rollers, anti-kickback fingers and a depth of cut scale on the front. Like all Grizzly machines, the G0634X comes with a 1-year warranty. (Consumables are not covered by the warranty.)The G0634X manual was written by our U.S.-based Tech Docs Department and is packed with useful information. Parts may be available online and shipped from the Grizzly parts warehouse in Springfield, MO. Color: Green.

A 12 in. 2-in-1 planer jointer that maximizes valuable work space. For woodworkers that lack the space for two benchtop machines, the G0959 12 in. Combo Planer/Jointer will simplify your shop. The compact benchtop design fits in small shops and is easy to use by hobbyists and DIYers looking to clean up old or rough lumber. The G0959 helical cutterhead has 28 inserts diagonally arranged in 2 rows for smooth shearing cuts, minimized tearout, a smoother finish and operating at lower noise levels compared to straight knife blades. Each can be rotated up to 3 times to expose a new sharp edge. The 1-1/2 HP motor provides plenty of power for planing or jointing. The dust collection shroud easily relocates depending on which operation you are using, while the 4 in. dust port allows easy connection to a dust collector. The planer and jointer tables lock firmly in place when in use, allowing accurate, repeatable cuts. Handymen and women will love the portability this machine provides when bringing it on a job site. Don't be fooled by competitors that sell similarly-priced machines with straight knives. Like all Grizzly combination machines, the G0959 comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty. )Made in an ISO 9001 factory.

This top-of-the-line 13 in. 2 HP Benchtop Planer with Helical Cutterhead comes with features you would expect from only the best. The granite table provides exceptional stability, never rusts and stays smooth and even for the life of the planer compared to steel bases that may deflect or sag in the planning process. The G0940 helical cutterhead has 30 inserts arranged in 2 rows that creates a cleaner, smoother and quieter cut compared to straight knife blades. Featuring a fixed-height table design, the cutterhead raises and lowers for thickness adjustments, as opposed to the table. This allows for permanent infeed and outfeed table setups. A depth-of-cut indicator that reads up to 1/8 in. helps you track planning depth. An adjustable cutterhead depth stop allows for repeatable planning operations to speed up production, reduce downtime and improve efficiency. The easy carry handles make this planer great for the jobsite and can be easily stowed-away after use in any home shop. Made in an ISO 9001 factorySPECIFICATIONSMotor 2 HP, 120V, single-phase, 15AMax. cut width 13 in. Min. stock length 6 in. Min. stock thickness 1/8 in. Max. stock thickness 6 in. Max. cut depth full width 1/32 in. Max. cut depth 6 in. wide 3/32 in. Cutterhead type 2 in. helical with 2-row spirals, 30 inserts Insert size and type 15mm x 15mm x 2.5mm indexable carbide insertsCutterhead speed 8500 RPMFeed rate 25 FPMTable size with extensions 13 in. x 28 in. Dust port size 2 in. with 4 in. adaptor. Color: Green.

Maximize the quality of finish straight from the planer. Using the G1021X2 3 HP Planer will save time and effort by quickly flattening and smoothing rough lumber. The G1021X2 features a 15 in., 4-row helical cutterhead complete with 52 indexable inserts that can each be rotated 3 times to expose new, sharp cutting edges. The indexable carbide inserts are positioned along a helical pattern with the cutting edges at a slight angle to the workpiece. This angle allows for smooth shearing cuts, minimized tearout, a smoother finish, and operating at lower noise levels. The G1021X2 features a powerful 230-volt, 3 horsepower motor to power through cuts up to 3/32 in. deep at full width or 1/8 in. deep on material up to 6 in. wide. Plane material from 3/16 in. to 6 in. thick with ease and choose between either 16 or 28 ft. per minute feed rates for the perfect finish. The precision-ground cast-iron table travels smoothly up and down on the heavy-duty 4-column supports and can be firmly locked in place for operation. The G1021X2 offers additional features such as extra-large ball bearing return rollers, a large side-mounted handwheel, cabinet-style stand, pedestal-mounted control panel, magnetic switch with thermal overload protection and powder coated paint for years of protection. Like all Grizzly planers, the G1021X2 comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. Color: Green.

The G0891 15" Fixed-Table Planer with 4-row helical cutterhead features a unique fixed table height design which allows for a permanent infeed/outfeed roller table setup. This can significantly boost efficiency in production settings.Gas struts allow you to easily lift the headstock to accommodate board thickness changes while keeping your infeed and outfeed tables in place.The 15", 4-row helical cutterhead comes complete with 48 indexable carbide inserts that can each be rotated three times to expose new, sharp cutting edges.The inserts sit at a slight angle to the workpiece for a shearing action that leaves a glassy smooth cut even on the toughest of woods.A 230-volt, 3 horsepower motor powers through cuts up to 1/8" deep at full width or 3/16" deep on material up to 6" wide.The 2-speed gearbox allows you to choose between 16 and 28 FPM for a smooth finish or high-production feed rate.The G0891 offers additional features such as a thickness scale, a large top-mounted handwheel, cabinet-style stand, cast-iron extension tables, angled dust port, and magnetic switch with thermal overload protection. Color: Multi.

No corners were cut when putting together this feature-rich 15 in. planer. With its 4-flute helical cutterhead, 52 indexable four-sided carbide inserts and 2-speed gearbox, ultra-smooth surfacing is the new normal, even on figured grain. Other features include a pedestal-mounted switch, precision-ground cast-iron infeed and outfeed tables and large board return rollers for efficient production. Color: White.

This planer is designed for heavy-duty use and can process large volumes of wood quickly and accurately. The inserts on the 4-row helical cutterhead sit at a slight angle to the workpiece for smooth shearing cuts, minimized tearout, a smoother finish, and operating at lower noise levels. The 92 indexable carbide inserts can each be rotated three times to expose new, sharp cutting edges. The solid cast-iron, extension tables make the total planer bed length just short of 5' long! They are precision-ground to a mirror-like finish for ultra-smooth lumber feeding. The adjustable bed rollers keep the planer feeding smoothly. The feed rollers are driven by a two-speed gearbox at 16 FPM or 28 FPM. The G1033X incorporates a safety magnetic switch for overload and power failure protection. The power controls are mounted on an attached pedestal for easy access. The power is transferred from the 5 HP motor to the cutterhead by a triple v-belt design. This ensures maximum power connection between the cutterhead and the feed drive. Color: Green.

Designed with the exacting tolerances your shop demands, the SB1109 20 in. Planer with Helical Cutterhead is top of its class in precision workmanship and dependability. The helical cutterhead delivers near mirror-smooth finishes right out of the gate. It consists of four rows of 92 indexable carbide inserts, each angled slightly to produce a shearing action. This shearing action results in less tear out in highly figured woods and quieter operation-and the planed surfaces are far superior to what you'll get with straight-knife or other 20 in. spiral cutterheads on the market. Other high-end features include a digital table height scale for ultra-precise and consistent thickness adjustments, precision-ground cast-iron tables and triple belt drive-everything that makes this planer truly live up to the South Bend name. Made in an ISO 9001 factory's certified SPECIFICATIONS Motor 5 HP, 220V, single-phase, 23AMaximum stock width 20 in. Maximum stock thickness 8 in. Minimum stock thickness 1/4 in. Minimum stock length 7 in. Maximum cutting depth 1/8 in. Cutterhead diameter 3-1/4 in. Cutterhead type 4-row helical with 92 inserts Cutterhead speed 5000 RPMInsert size and type 15 x 15 x 2.5mm, indexable carbide Feed rate Variable, 10-28 FPMTable size 56 in. x 20 in. Table wings size 15 in. x 21-1/4 in. Dust port size 5 in. Footprint 23-1/2 in. x 29-1/4 in. Overall dimensions 46-1/2 in. W x 56 in. D x 46 in. Approx. shipping weight 820 lbs. Color: Blue.

Get your next woodworking project done with this 8-in. two-in-one planer jointer. The compact benchtop design fits into small spaces and makes it easy to use for cleaning up old or rough lumber. An 1-1/2 HP motor delivers superior power. The helical cutterhead features 18 inserts diagonally arranged in two rows for smooth shearing cuts, minimized tearout, a smoother finish and operating with less noise compared to straight knife blades. You can rotate it up to three times to expose a new sharp edge. For convenient dust collecting, the dust collection shroud easily relocates depending on which operation you are using, and the 2-in. dust port allows easy connection to a dust collector. The planer and jointer tables lock firmly in place when you're using it to ensure accurate, repeatable cuts. The quick-release fence offer stops at 0-degrees and 45 degrees 2-1/2 in. Die-cast aluminum infeed and outfeed tables make it sturdy. Color: Green.

The JET 15" helical head planer quickly and quietly transforms rough lumber into smooth boards. This machine means business with a powerful 3-HP motor, combined with a helical cutterhead housing 48 staggered carbide quick-change knives. The innovative Precision Air Strut System (PASS) provides consistent upward pressure on the cutterhead, reducing the chance of board snipe. The conveniently-located two-speed gear box allows for quick and easy feed rate adjustments, while removing up to 1/8-inch material with each pass for a smooth finish. A large precision cast-iron table and infeed/outfeed tables make this planer a beautiful addition to the shop. Color: white.