Shop for pc masonry gal 2 part epoxy adhesive paste

The PC Products PC-Masonry is a two-part masonry repair epoxy adhesive paste used to replace missing concrete or fill cracks in masonry elements in indoor and outdoor applications. The epoxy is made from a non-sagging paste that can be used in horizontal and overhead applications. It can be painted, stained, and machined, and is nonconductive after it has been cured. Color: Grey.

PC-Super Epoxy is a non drip translucent paste epoxy with unlimited uses in bonding, sealing, and as a filler for most materials. This paste epoxy was formulated to be extremely versatile, flexible, and resilient with enormous strength. Unlike our other paste epoxies PC-Super Epoxy is designed to be fast curing. PC-Super Epoxy has a viscosity similar to Vaseline making overhead and sidewall work easy without drip or sag. Stair installers just love this product for installing iron balusters. PC-Super Epoxy demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water. Bonds most everything to anything. In cold or cool temperatures, place PC-Super Epoxy container near heat prior to using. PC-Super Epoxy mixes and spreads easier at 80 degree F than at 40 degree F. Any clean smooth flat surface is an excellent surface for mixing and working. A small putty knife or flexible artist spatula are great tools for mixing and applying PC-Super Epoxy. Denatured alcohol is excellent for smoothing applied PC-Super Epoxy. Also use Denatured alcohol to clean surfaces before applying. Ideal for use as adhesive: wood, metal (all types), glass, brick, block, rubber, concrete, stone, slate, fiberglass, tile, and more in any and all combinations; as sealant: oil, gas, water tanks, cellar cracks, pressure tanks, and plumbing leaks; as a filler: holes, castings, patterns, molds, voids, welds, steering wheels and much more. Color: Clear.

PC-11 is a white, marine grade paste epoxy that bonds and cures, wet, dry and underwater. PC-11 is a simple 1:1 mix. PC-11 allows about 30 minutes of working time and cures for service in 12-24 hours. The epoxy can be shaped and molded and machined and painted after cured. PC-11 is your choice when extra flexibility is needed; you are bonding to a wet or underwater surface or where the white color is more advantageous. Bonds to unlike surfaces.

PC-11 is a white, marine grade paste epoxy that bonds and cures, wet, dry and underwater. PC-11 is a simple 1:1 mix. PC-11 allows about 30 minutes of working time and cures for service in 12-24 hours. The epoxy can be shaped and molded and machined and painted after cured. PC-11 is your choice when extra flexibility is needed; you are bonding to a wet or underwater surface or where the white color is more advantageous. Bonds to unlike surfaces.

PC 7 is the tough job epoxy. This paste epoxy was formulated for maximum bonding power. When mixed, components A (grey) and B (black) reacts to form a bond of tremendous strength. PC-7 formulation provides extended working time, for large and critical jobs, which allow the user to reposition work or make changes. High "wet grab" or tack of PC-7 Paste Epoxy makes overhead and sidewall work easy without drip or sag. PC-7 demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water. Approximately equal amounts of A and B by volume; variations of either component as high as 20 percent will not affect the bond strength. When desirable, one part of A to two parts B may be used to increase elasticity (expansion joints, etc.). In cold or cool temperatures, place PC-7 container near heat prior to using. PC-7 mixes and spreads easier at 80 degree F than at 40 degree F. Any clean smooth flat surface is an excellent surface for mixing and working. A small putty knife or flexible artist spatula are great tools for mixing and applying PC-7. Use with as adhesive: wood, metal (all types), glass, brick, block, rubber, concrete, stone, slate, fiberglass, tile, and more in any and all combinations; as sealant: oil, gas, water tanks, cellar cracks, pressure tanks, and plumbing leaks; as a filler: holes, castings, patterns, molds, voids, welds, steering wheels and much more. Color: Brown.

PC-7 is the tough job epoxy. This paste epoxy was formulated for maximum bonding power. When mixed, components A (grey) and B (black) reacts to form a bond of tremendous strength. PC-7 formulation provides extended working time, for large and critical jobs, which allow the user to reposition work or make changes. High "wet grab" or tack of PC-7 Paste Epoxy makes overhead and sidewall work easy without drip or sag. PC-7 demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water. Approximately equal amounts of A and B by volume; variations of either component as high as 20 percent will not affect the bond strength. When desirable, one part of A to two parts B may be used to increase elasticity (expansion joints, etc.). In cold or cool temperatures, place PC-7 container near heat prior to using. PC-7 mixes and spreads easier at 80°F than at 40°F. Any clean smooth flat surface is an excellent surface for mixing and working. A small putty knife or flexible artist spatula are great tools for mixing and applying PC-7. Use with as adhesive: wood, metal (all types), glass, brick, block, rubber, concrete, stone, slate, fiberglass, tile, and more in any and all combinations; as sealant: oil, gas, water tanks, cellar cracks, pressure tanks, and plumbing leaks; as a filler: holes, castings, patterns, molds, voids, welds, steering wheels and much more. Color: Brown.

PC Products PC-Masonry is a 2-part masonry repair epoxy adhesive paste used to replace missing concrete or fill cracks in masonry elements in indoor and outdoor applications. The epoxy is made from a non-sagging paste that can be used in horizontal and overhead applications. It can be painted, stained, and machined, and is nonconductive after it has been cured. Color: Grey.

PC-Petrifier and PC-Woody in a convenient kit. PC-Petrifier is a single component adhesive, formulated to fully penetrate and revitalize rotted wood. Modern technology has allowed us to develop a water base wood consolidate that is environmentally friendly. PC-Petrifier's low viscosity allows deep penetration into soft rotted wood fiber, restoring old wood to near structural integrity. Seal and restore rotted soft wood fibers in window sills, sashes, frames, trim, decorative beams and columns, etc. PC-Petrifier can also be used to prepare old wood for priming and painting. Apply to exposed wood grain to protect from damage. PC-Woody is an epoxy paste formulated to replace missing and rotted wood, with a structural strength greater than most wood. PC- Woody is a permanent wood repair for interior and exterior applications. This epoxy is made from real wood. PC- Woody demonstrates excellent resistance to all weather elements, mildew dry rot, UV light, fresh and salt water, and also chemicals present in pressure-treated wood. After cure paint, stain, drill, machine, sand, file, tap, or saw. Repair log homes, furniture, window and door sills and much more. Color: Off White.

SET-XP epoxy anchoring adhesive is a high-strength formula for anchoring and doweling in cracked and uncracked concrete and masonry applications. It is a two-part system with the resin and hardener being simultaneously dispensed and mixed through the mixing nozzle. When properly mixed, adhesive will be a uniform teal color for easy post-installation identification.

SET-XP epoxy anchoring adhesive is a high-strength formula for anchoring and doweling in cracked and uncracked concrete and masonry applications. It is a two-part system with the resin and hardener being simultaneously dispensed and mixed through the mixing nozzle. When properly mixed, adhesive will be a uniform teal color for easy post-installation identification.