Shop for madison m7750 plastic side mounted liquid level flo

The Basement Watchdog 1 HP submersible sump pump has the highest capacity of all of the pumps in our Basement Watchdog line. It features a powerful and energy-efficient permanent split capacitor (PSC) motor providing 6,540 GPH at 0 ft. lift and 4,440 GPH output at 10 ft. lift. The 2-inch discharge helps maximize output. Simply put, the BWSS100 moves water out fast, so your basement stays dry. Unlike other similar sump pumps, this one uses only 6.3 Amps, paying for itself in energy savings. The stainless steel and cast iron construction, along with upper and lower ball bearings, and dual carbon ceramic shaft seals, protect the motor for years of service. The caged dual float switch provides not one but two floats for added protection, while the protective cage around the float prevents debris or other wires from interfering with the floats. Easy to install, the caged dual float switch can be adjusted to any level. The vented and curved bottom prevents debris from building up under the primary float. The float switch is easy to install and can be adjusted to any level. Get the best level of protection from flooding with this high-capacity sump pump.

The Everbilt 1/3 HP automatic submersible utility pump removes water from areas like crawl spaces, window wells or other low-lying areas. It has an innovative and reliable mini-float switch to detect the water level. The mini-float switch will turn the pump on when water levels reach approximately 1-1/2 in. and turn the pump off when water levels reach approximately 1/8 in. This pump is not intended for permanent installation, and is not to be used as a sump pump.

Condensate Cop is a unique clamp-on float switch intended for HVAC drain pan installation. The Condensate Cop features a large over-clamping area that fits easily over the edge of all types of drain pans; including formed plastic and galvanized sheet metal. A separate float/probe assembly swivels to accommodate drain pans having sloped sides. The swivel action allows the installer to position the float switch for best operation and then clamp it into plAce. Sealed inside the probe is a magnetically actuated normally closed switch. The switch opens when rising water presents a potential flooding condition. 2 wire connection for easy hook up to a thermostat circuit.

This 123 lbs. tank will suit your refrigerant recovery needs. It is equipped with a Y-valve for liquid and vapor. It has a 3/4 in. NPT opening that accepts 80% fill float switch shut-off device. Float switch device not included. Size: large.

LEVEL SENSE alarm is a High Water Alarm that alerts you before a Basement Sump Pump allows water to back up into the basement. The difference between LEVEL SENSE Alarm and every other product on the market is the rechargeable battery and its ability to guard for more than a week when AC power is lost. Most high water alarms today come with a 9VDC alkaline back-up battery. Alkaline Batteries need to be remembered, checked and changed in order to be certain they will operate during a power failure. Not the case with LEVEL SENSE alarm straps directly to the sump pump discharge pipe (or can be wall mounted) and contains a power supply, float switch, float switch bracket and mounting accessories for all of it in the box. LEVEL SENSE Alarm installs in Minutes and can be heard anywhere in the home.

The Asurity CS-2 Pipe-Mounted Elbow Switch is simple to install, easy to service and extremely reliable. As water level in the auxiliary fitting of the drain pan rises due to a clogged air conditioning condensate drain, the switch shuts off the system, thus preventing water from overflowing. The durable, precise magnetic reed switch will not rust, operating smoothly every time.

Sump Pump Discharge Pipe Clamp on float switch with mounting bracket and 15 foot wire. Attaches to the discharge pipe of a sump pump to give a high level alarm works with Level Sense and most household security alarm systems. The vertical float switch is great for applications in crowded sumps where a regular tethered switch may get stuck.

The Superior Pump 92060 Pump Alarm System provides early warning of pump failure. Simple to install, the Pump Alarm System with tethered float switch, will sound when water levels reach a level pre-set by you. The unit operates on 115-Volt and includes a 9-Volt battery backup and an automatic alarm reset. Alarm tethered float switch features a 15 ft. power cord and hardware to attach the switch to your pumps discharge pipe. Alarm offers an 87 dB horn and low battery "CHIRP". Pump Alarm System will work in both sump and sewage applications. Kit includes: alarm, alarm float, float mounting hardware and installation instructions.

The Basement Watchdog Universal Dual Float Switch and Controller is the most reliable float switch in the industry. It will activate your primary sump pump when rising water lifts either float by 1/4 in. The float switch has not one but two large floats both in a protective cage. Should one float fail to activate the pump, the second float will automatically takeover. Once the float drops to the original position, the controller will keep the pump running for an additional 10 seconds to completely drain the sump pit. The protective cage prevents debris or other wires from interfering with the floats. The Basement Watchdog Dual Float Switch and Controller is easy to install and can be adjusted to activate at any level. This universal switch can be used with most existing sump pumps.

Level Sense Sentry: Can connect to an unlimited amount of sensors into 2 inputs Which provide E-mail and/or Text Message Use any float switch and nearly any 3rd party sensor that gives a contact closure or analog input Cloud enabled water/liquid level sensor. Get alerts when level crosses a set threshold. View status on the App or website. Inputs can be configured in the APPs or Website as Normally Open or Normally Closed to work with any sensor. This SKU comes with (1) included float switch. Additional float switches can be added. The low profile float switch mounting bracket ensures that there will be no additional wires in the sump to inhibit proper pump operation. Level sense has a build in rechargeable battery and integrated battery charger for 4-hours. Never change a battery again.