Shop for linovision lr1002 1et poe over coax eoc transmitter

The Triplett Model LVPRO40 10Gb Multifunctional Low Voltage Cable/Network Tester offers a comprehensive solution for LAN installers and repair technicians. It tests and traces both twisted pair (CAT5E/6/6A/7) and coax cables, checks twisted pair continuity, opens/shorts, reversals, and split pairs. 8 RJ45 remotes allow for the testing of up to 8 cables. In addition, it runs a variety of cable testing procedures such as wiremap, timing tests (delay, skew), impedance measurement, Ethernet switch port blink, cable length, PoE volts, loaded battery test and 10M/100M/1G/10G indication, plus it gives you the ability to store and print up to 250 test reports. Featuring a 2.8 in. backlit graphical LCD, built-in RJ11, RJ45, and coax ports, this tester ensures optimum visibility and easy connection. Use the tone mode to trace cables effortlessly. Its auto power off feature and 70VDC input protection add to the convenience and safety. Includes (8) remotes, USB cable, RJ45 to RJ45 connector cable, RJ45 cable with alligator clips, and (3) AA batteries.

PoE 6 uses the power of Wi-Fi 6 to support wifi speeds up to 1.6 Gbps, increase your internet's efficiency, and reduce network congestion when compared to prior wifi standards. PoE 6 provides fast wireless internet speeds, up to 1.6 Gbps. Because it utilizes Power over Ethernet cables, PoE 6 doesn't need a separate power supply. It can be easily mounted to ceilings or walls to maximize wifi coverage throughout your home. Color: Sandstone. Material: Resin.

The MILWAUKEE® Coax Install Kit provides all the tools needed to cut, strip, and crimp coaxial cables. This kit includes (1) Coax Compression Crimper, (1) Coax Stripper, and (1) 6" Diagonal Cutters. This kit also comes with (1) Zippered Pouch to store tools when not in use.

The Triplett POE-1TR is a Low cost and easy, speedy solution that allows you to use existing coax cable to send IP camera signals. Commomly used in pairs with your RG59/6U cable to exceed the IEEE 802.3 10/100BaseT specification. The working range is up to 300 m at 10 Mbps speed when using RG6U coax cable.

SPT Security IP (LAN) & Analog over Coax Transceiver Extender is a device to transmit IP & Analog over coaxial cable. This product enables you to replace analog cameras with IP cameras without installing new cabling. This product could simultaneously transmit analog CVBS video signal and digital IP video signal (or any IP or Ethernet LAN) over a single coaxial cable for distance transmission of 900 ft. to 1,500 ft. It completely solves the problem of IP transmission delay by the hybrid transmission solution. This device should be used in pair, one as a local receiver and the other as a remote transmitter.

Housed in a rugged, metallic enclosure, the LANRJ45C6P provides critical electrical and environmental shielding to railway communication equipment. This versatile unit protects cable up to CAT6, 10Gbps and power over Ethernet, (PoE). Suitable for: Communications, networks, Power over Ethernet (PoE), cameras and radios.

Our best-value coax starter compression tool kit for the installer who occasionally works with coax. Applications include: Cutting coax; Stripping RG-59/6/6 Quad/ Plenum coax; Compressing F/BNC/RCA compression connectors on to coax cables. Cut, strip and terminate in one handy tool hip kit.

This is for driving two POE devices off one cable. If you have an extremely long run for one camera and you needed to add another, this would be a great solution. Plugged into two POE+ ports at the switch which uses one CAT6 cable and at the far end it splits to two POE ports that you have a splitter for Ethernet and 12-Volt to run a powered mic and camera and the other is just running another POE camera. Another solution would be having a splitter for Ethernet and 12-Volt and one for Ethernet and 5-Volt. You can also run a camera and power injector if you want. Each connected device requires a separate router/switch port. Only 10/100 is supported over 2-pairs according to Ethernet standards. It supports 802.3AF PoE applications.

The device is used to power security camera with 12 VDC voltage over single coaxial cable and transmit/receive the composite HD video signals from the cameras over the same 75 ohm coaxial cable (RG-59 or higher quality) at a distance up to 1,200. Monitoring side input 24-36 VDC, plug and play. It is ideal for monitoring areas where no power is available to operate a camera.

The TRIPLETT Model LVPRO10 TDR/Cable Tester offers a comprehensive solution for LAN installers and repair technicians. It tests and traces both twisted pair (CAT5E/6/6A/8) and coax cables, detects cable length, and checks twisted pair continuity, opens/shorts, reversals, and split pairs. Detect PoE presence and perform an Ethernet port test with this versatile tool. Featuring a 2.8 in. backlit graphical LCD, built-in RJ11, RJ45, and coax ports, this tester ensures optimum visibility and easy connection. Use the tone mode to trace cables effortlessly. Its auto power off feature and 70VDC input protection add to the convenience and safety. The package includes a tracer probe with a built-in NCV Detector (>40V), flashlight, wiremap indicator lights, a low battery indicator, an earphone jack for noisy environments, and more.