Shop for dual battery selector switch cup mount

The new Dual Station (DS) unit is designed for inboard or sterndrive boaters that like using one lever to do both throttle and shift in their dual station boat. The Station Selector allows smooth operation of dual function controls in a dual station application. Great for dual station boats without a lot of dash space or for use with side mounted controls in 2 stations. Just put both levers in neutral, turn the selector switch, and you have changed stations. Teleflex recommends to only use CCX633xx cables with the DS Unit. Note: Throttle cables should be a pull to advance throttle set up. Engine adapter kits for the control cables are needed unless provided by the manufacturer. Control boxes not included. Parts Required: Single Engine Dual Stations:1 DS Gear Unit (207573)1 Station Selector Unit (204993)1 DS Throttle Unit (177030)1 cable from Selector to DS Gear Unit (CCX633xx)1 cable from Station 1 to DS Gear Unit (CCX633xx)1 cable from Station 2 to DS Gear Unit (CCX633xx)1 cable from DS Gear Unit to transmission (CCX633xx)1 cable from Station 1 to DS Throttle Unit (CCX633xx)1 cable from Station 2 to DS Throttle Unit (CCX633xx)1 engine adapter kit for control cables (unless provided by mfg.). Material: Metal.

AEDIKO 10pcs 2 AA Battery Holder with Switch 2X 1.5V AA Battery Holder Case with Wire AA Battery Holder with ON/Off Switch

AUTOVIC Bass Boat Battery Disconnect Switch Corner Bracket, Durable Marine Battery Cut Off Switch Corner Mount Holder for Marine RV Camper

Ampper Battery Switch Mounting Panel, Stainless Steel Mounting Panel Plate with Hardware for Ampper Battery Switch Fix and Installation

Ampper Panel Mounted Battery Switch, 12-48 V Battery Power Cut Master Switch Disconnect Isolator for Car, Vehicle, RV, Boat and More (On/Off)

Switch system uses dual voltage sensing relays (VSR's) to ensure you will always have a fully charged reserve battery. When the switch is in position 1 it becomes the sensing battery for the VSR. Battery 2, which is in isolation, will be charged via the VSR ensuring it is always fully charged. When the switch is in battery 2 position this becomes the sensing battery and battery 1 is charged via the VSR. Material: Plastic.

The Perko Dual Battery Selector Switch allows the addition of an extra battery for accessories. This switch provides the flexibility of selection between batteries or combined operation of both batteries in parallel for starting or charging. It can also serve as an emergency main disconnect switch in the event of an electrical problem. All models are make before break design and are ignition protected. Four switch positions: Both Off, Both On, Battery 1 On/Battery 2 Off, Battery 1 Off/Battery 2 On. Ideal for: Tenders, Skiffs, Flats Boats, Inflatables or Small Boats. Mounts On: Consoles, Lockers, Storage Bulkheads, Interior Gunnel Walls or Under Bench Seats.

Ultra bright, energy efficient, long life Internal solid-state transfer switch automatically connects the internal battery to LED board for minimum 90-minute emergency illumination mounting hardware provided for back surface wall mount 5-year warranty on all electronics and housing. Battery pro rated for 5-years UL listed for wet locations illumination ultra bright, energy efficient, long life LED. Electrical dual 120/277 voltage. Charge rate/power on LED indicator light and push-to-test switch for mandated code compliance testing. 4.8V long life, maintenance-free, rechargeable Ni-Cd battery. Internal solid-state transfer switch automatically connects the internal battery to LED board for minimum 90-minute emergency illumination. Fully automatic solid-state, 2-rate charger initiates battery charging to recharge a discharged battery in 24-hours. Mounting hardware provided for back surface wall mount. Housing 5VA flame retardant, UV-stabilized polycarbonate gray finish. High-impact resistant, UV-stabilized polycarbonate clear lens. Corrosion-resistant enclosure with engineering grade silicone gasket. EZ snap-out chevron directional indicators. Optional internal heater for cold temperature applications. USA: substantial transformation assembly in the U.S. complies with assembled under the buy American act. SKU:20635 UPC:817354020635. Item weight: 3.88 lbs. package dimensions: 12.8 in. x 8.98 in. x 2.99 in. Color: Green.

This Heavy Duty Battery selector switch has 380A continuous and 2000A cranking amps, giving it the power to start a large single or dual diesel engines. Can be surface or rear panel mounted. Ignition protected. Safe for installation on gasoline powered boats. Constructed of injection molded nylon with machined brass contacts. Installs with four #10 RH fasteners (not included).

LAMPVPATH 5Pcs 2 AA Battery Holder with Switch, 2X 1.5V AA Battery Holder Case with Wire Leads and ON/Off Switch(5 Pack)

LampVPath (Pack of 2 2 AA Battery Holder with Switch, 2X 1.5V AA Battery Holder Case with Wire Leads and ON/Off Switch

Perko's 8501 Series battery selector switches are among the most popular battery switches ever produced. Their use of the traditional Perko bolt circle makes for easy installation, whether new or as a replacement. These switches can be mounted in numerous locations. And as ignition protected switches, they can be installed in the engine rooms of gasoline powered boats. In addition to doing everything a battery disconnect switch does, battery selector switches permit battery selection (of two or more batteries) for specific purposes including starting engines, running accessories or even recharging. They allow for the use of one or more batteries in systems with one or more engines and facilitate putting batteries in parallel for emergency starting when one or both batteries are substantially discharged. Perko battery switches are designed for surface mounting. Standard duty switches have a bright red polycarbonate housing for safety with a large easy-to-turn black knob. The housing of the heavy duty switches are red fiber-reinforced polycarbonate. Selector switches are designed with a make before break feature. This allows switching between the 1, the ALL and the 2 positions while the engine is running. Models with an Alternator Field Disconnect feature offer protection for Non-Unitized Alternators should the switch accidentally be turned to the OFF position with the engine running. Size: medium.

Perko 8521DPC Dual Battery Selector Switch with Cup Mount

Perko Dual Battery Selector Switch - Cup Mount

QTEATAK 2 Set 8 x AA Thicken Battery Holder Base Box with ON/Off Switch and Wire and Cover

Ultra bright, energy efficient, long life Internal solid-state transfer switch automatically connects the internal battery to LED board for minimum 90-minute emergency illumination mounting hardware provided for back surface wall mount 5-year warranty on all electronics and housing. Battery pro rated for 5-years UL listed for wet locations illumination ultra bright, energy efficient, long life LED. Electrical dual 120/277 voltage. Charge rate/power on LED indicator light and push-to-test switch for mandated code compliance testing. 4.8V long life, maintenance-free, rechargeable Ni-Cd battery. Internal solid-state transfer switch automatically connects the internal battery to LED board for minimum 90-minute emergency illumination. Fully automatic solid-state, 2-rate charger initiates battery charging to recharge a discharged battery in 24-hours. Mounting hardware provided for back surface wall mount. Housing 5VA flame retardant, UV-stabilized polycarbonate gray finish. High-impact resistant, UV-stabilized polycarbonate clear lens. Corrosion-resistant enclosure with engineering grade silicone gasket. EZ snap-out chevron directional indicators. Optional internal heater for cold temperature applications. USA: substantial transformation assembly in the U.S. complies with assembled under the buy American act. SKU:20635 UPC:817354020635. Item weight: 3.88 lbs. package dimensions: 12.8 in. x 8.98 in. x 2.99 in. Color: Red.

The Perko Single Battery Disconnect Switch permits the battery to be shut off from the electrical system when the vessel is not in use. They can also serve as an emergency main disconnect switch in the event of an electrical problem. The cup mount option provides an attractive, durable easy open/close cover that hides and protects the switch face.

abcGoodefg 2 Pack 8 x 12V AA Battery Holder Case Box with ON/Off Switch and Leads Wire Cover

350 Amp continuous rating for inboard gasoline and diesel engines. 1-piece tin-plated copper stud design never loosens over time. Terminal studs accept 3/8 in. or M10 ring terminals. Ignition protected and UL Listed. Selector features make-before-break contact design. Color: Red. AFD equals to Alternator Field Disconnect models. Allow switching while running the engine without damaging the alternator. Material: Plastic.

Switches isolated battery banks to all loads or combines battery banks to all load. Make-before-break contact design allows switching between battery banks without power interruption. Products meet ABYC, NMMA and Coast Guard standards.