Shop for drip emitter

DIG Pressure Compensating (PC) Drip Emitters are designed to produce a consistent flow rate over a pressure range of 10 to 45 psi. The PC drip emitter maintain a consistent flow rate regardless of fluctuations in water pressure or differences in landscape elevation. DIG PC drip emitters offer a convenient way to water both new and existing landscapes, including difficult terrain such as slopes, oddly shaped areas and sites with high winds. The PC drip emitter with barbed inlet can easily be installed into 1/2 in. poly tubing or at the end of the micro tubing. Color: Blacks.

The Multi-Stream Drip Emitter is an ideal sprinkler for watering annuals in a flowerbed or container. The full pattern, gentle multi-stream extends up to 3 ft. at typical drip operating pressure of 30 PSI. You can decrease the spray radius, or even shut it all the way off, by rotating the multi-stream head clockwise. The 10-32 male thread (MT) inlet on the multi-stream emitter connects to an optional 6- or 12-in. drip stake with 10-32 female thread (FT). The inlet also has a barb for direct connection to 1/4-in. tubing and you can then hold the emitter in place at each plant with a drip tubing Y-anchor stake. You can either run 1/4-in. drip tubing from a drip manifold, a 1/2-in. drip tubing "lateral" line, or directly off the hose faucet with a 1/4-in. hose faucet x 1/4-in. adapter. Recommended operating pressure is 30 PSI. For outdoor irrigation use with cold water only. Color: Blacks.

The Rain Bird Pop-Up Sprinkler to Drip Emitter Conversion Kit turns your sprinkler head into a 6-port drip emitter watering system. Ideal for larger planting beds and gardens. By applying water directly to the root zone of your plants, you eliminate wasteful overspray and improve plant health while using less water. Color: Blacks.

DIG Pressure Compensating (PC) Drip Emitters are designed to produce a consistent flow rate over a pressure range of 10 psi. to 45 psi. The PC drip emitter maintain a consistent flow rate regardless of fluctuations in water pressure or differences in landscape elevation. DIG PC drip emitters offer a convenient way to water both new and existing landscapes, including difficult terrain such as slopes, oddly shaped areas and sites with high winds. The PC drip emitter with barbed inlet can easily be installed into 1/2 in. poly tubing or at the end of the micro tubing. Color: Greens.

DIG Pressure Compensating (PC) Drip Emitters are designed to produce a consistent flow rate over a pressure range of 10 to 45 psi. The PC drip emitter maintain a consistent flow rate regardless of fluctuations in water pressure or differences in landscape elevation. DIG PC drip emitters offer a convenient way to water both new and existing landscapes, including difficult terrain such as slopes, oddly shaped areas and sites with high winds. The PC drip emitter with barbed inlet can easily be installed into 1/2 in. poly tubing or at the end of the micro tubing. Color: Greens.

DIG Pressure Compensating (PC) Drip Emitters are designed to produce a consistent flow rate over a pressure range of 10 to 45 psi. The PC drip emitter maintain a consistent flow rate regardless of fluctuations in water pressure or differences in landscape elevation. DIG PC drip emitters offer a convenient way to water both new and existing landscapes, including difficult terrain such as slopes, oddly shaped areas and sites with high winds. The PC drip emitter with barbed inlet can easily be installed into 1/2 in. poly tubing or at the end of the micro tubing. Color: Blacks.

DIG Pressure Compensating (PC) Drip Emitters are designed to produce a consistent flow rate over a pressure range of 10 to 45 psi. The PC drip emitter maintain a consistent flow rate regardless of fluctuations in water pressure or differences in landscape elevation. DIG PC drip emitters offer a convenient way to water both new and existing landscapes, including difficult terrain such as slopes, oddly shaped areas and sites with high winds. The PC drip emitter with barbed inlet can easily be installed into 1/2 in. poly tubing or at the end of the micro tubing. Color: Blacks.

DIG's 4 Outlet PC Drip Emitter is a drip irrigation manifold with built-in anti-drain valve. This unique design ensures even distribution uniformity of flow for each outlet and eliminates drainage after the system valve is close. The manifold converts a 1/2. sprinkler riser into a 4-outlet drip irrigation system without altering the flow of the sprinkler system zone. The 4 Outlet PC Drip Emitter with built-in anti-drain valve connect to ¼ in. micro tubing or ¼ in. dripline to efficiently irrigate a wide variety of plants and trees. Color: Blacks. Material: Acrylonitrile Butadiene Styrene (ABS).

DIG's Earthline Brown 1 GPH PC drip-line is a pressure compensating drip line with drip emitters every 18 in. delivering equal flow over the length of drip line. Use for all plantings, including groundcover, shrubs or individual plants, loop around trees or for complete coverage of an area where multiple lines of drip line are placed 16 in. to 24 in. apart. Each PC drip emitter inside the drip line consists of a cylinder with a labyrinthine water passage, filter and diaphragm. Each PC drip emitter continuously adjusts to varying incoming water pressure, ensuring a constant flow rate along the line. Color: Browns/Tans.

The Multi-Stream Drip Emitter is an ideal sprinkler for watering annuals in a flowerbed or container. The full pattern, gentle multi-stream extends up to 3 ft. at typical drip operating pressure of 30 PSI. You can decrease the spray radius, or even shut it all the way off, by rotating the multi-stream head clockwise. The 10-32 male thread (MT) inlet on the multi-stream emitter connects to an optional 6- or 12-in. drip stake with 10-32 female thread (FT). The inlet also has a barb for direct connection to 1/4-in. tubing and you can then hold the emitter in place at each plant with a drip tubing Y-anchor stake. You can either run 1/4-in. drip tubing from a drip manifold, a 1/2-in. drip tubing "lateral" line, or directly off the hose faucet with a 1/4-in. hose faucet x 1/4-in. adapter. Recommended operating pressure is 30 PSI. For outdoor irrigation use cold water only. Color: Blacks.