Shop for deckwise brown ipe clip extreme hidden deck fastene

Hidden deck fasteners with a 3/32 in. gap are a simple install process. They allow homeowners a top-of-the-line, fastener free deck finish. EXTREME Ipe Clip BLACK fasteners utilize the edge-mount system for fastening hardwood boards. This makes these clips nearly invisible. This particular design works as a camouflage between board gaps, perfect for keeping the fastener unseen. EXTREME fasteners are manufactured using a resilient polyethylene, further maximizing ultraviolet ray (UV) and chemical resistant assets. The EXTREME is molded with a black oxide coated stainless steel insert. This stringent steel insert helps enable the fastener to securely attach deck boards to joists for long-lasting hold down. Put to the test over other top edge-mount fastening systems, the EXTREME is proven to be up to three-times stronger. During the EXTREME installation process, deck boards are secured only on one side. This will allow the natural expansion and contraction of hardwood. Because this is a biscuit fastener, it sits inside the edge slot grooves of hardwood boards. On-site installers can groove the 5/32 in. edge slots into decking boards themselves with a router or biscuit joiner. Purchasing pre-grooved deck boards is also a possibly. At a 45° angle, deck screws are secured down through the EXTREME, downward into the bottom groove slot of the deck board and right into the deck joist. As a result of the fasteners integrated spacer leg, the EXTREME guarantees uniform gap spacing.

EXTREME Ipe Clip hidden deck fasteners with a 3/32 in. gap are a quick install. These BLACK clips offer both DIY homeowners and contractors a professional luxurious smooth, and fastener-free deck surface. The EXTREME hidden deck fastener uses an edge-mount method for attaching hardwood deck boards. This is what makes these deck fasteners nearly invisible between board gaps. Our patented deck clip is molded of a polyethylene resin outer shell that further adds chemical and UV resistant properties. The EXTREME deck fasteners are manufactured with a rigid black oxide coated stainless steel insert that firmly holds decking to joists for longer lasting hold-down. These deck clips are tested to be up to 3X stronger than other edge-mount deck and patio fastening systems. Hardwood deck boards are only secured on one edge. This allows for the natural expansion and contraction of hardwood decking boards on their widths. As a biscuit style deck fastener, it fits into an edge groove. Builders can router the 5/32 in. edge groove, use a biscuit joiner to create a slot or purchase pre-grooved hardwood boards. Deck screws are installed at 45° through the fastener down into the bottom groove edge of the hardwood board, then down into the joist below. Installing each consecutive deck board alongside the next board repeatedly assures consistent gap spacing from the fastener's integrated gap spacer leg.

EXTREME Ipe Clip BROWN hidden deck fasteners with a 3/32 in. gap are simple to install. They allow DIY homeowners and builders a high-end, fastener-free, and smooth decking surface. The EXTREME fastener features an edge-mount method for connecting hardwood deck boards, making these fasteners nearly invisible. This patented design provides camouflage between the board gaps, hiding the deck clip out of sight. The EXTREME is constructed of a polyethylene resin that adds both chemical and UV resilient properties. EXTREME hidden fasteners are made with a tough black oxide coated stainless steel insert that solidly holds decking to joists for a long lasting hold-down. These fasteners have been put to the test to be up to 3X stronger than other invisible deck clips and deck fastening systems. Deck boards are secured only on one side. This allows for the natural expansion and contraction of hardwood decking on its width. As a biscuit-style deck fastener, it fits into the edge groove of the board. Installers can easily router the 5/32 in. edge groove on site, use a biscuit joiner to cut slots, or invest in pre-grooved hardwood deck boards. Deck screws are pre-drilled and set at a 45° angle through the EXTREME clip into the lower groove edge of the board. The deck screw then continues down into the joist below. Installing each hardwood deck board utilizing the EXTREME fastener clip will repeatedly produce consistent gap spacing due to the incorporated gap spacer leg on the clip.

EXTREMEKD Ipe Clip brand BLACK hidden deck fasteners with a 1/4 in. gap provide homeowners a fastener free deck surface. DIY Home Owners also get a quick/easy installation process. Made for attaching hardwood decking boards, the EXTREMEKD offers an edge-mount system making them practically invisible. This unique design offers concealment among deck board gaps, camouflaging the fastener. These hidden deck fasteners are created using a tough, yet pliable polypropylene that further enhances its U.V. ray and chemical resilience. The Clip is factory-made with a black oxide stainless steel insert. The EXTREMEKD's injection molded insert is what allows it to keep deck boards extra secure for lasting hold-down. The EXTREMEKD is tested to be up to 3 times stronger than other hidden fasteners. Deck boards are only secured on one side allowing the natural expansion and contraction of hard-wood decking. EXTREMEKD's are biscuit style fastener, which allows them to sit within the edge groove of grooved board. 5/32 in. edge grooves can be cut into decking boards by using either a router or biscuit joiner. Buting pre-grooved decking boards is also a suitable choice. To correctly attach a clip, a decking screw is inserted at a 45° angle through the fastener, screwing down into the bottom part of edge slot, and securely into the joist beneath. When repeatedly installing deck boards joined with the EXTREME4, the fastener's essential spacer leg will provide constant and even gap spacing.

Installment of EXTREMEKD Ipe Clip BROWN hidden deck fasteners with a 1/4 in. gap is straight forward. DIY home-owners and contractors get a high end, fastener-free decking surface. EXTREMEKD fasteners use an edge-mount method to affix hardwood decking boards. This also makes these deck fasteners practically invisible after the installation. Our proprietary design offers camouflage among gaps of the deck boards, keeping the fastener hidden. EXTREMEKD is shaped from a molded polypropylene that provides additional chemical and ultraviolet ray resilient properties. These fasteners are made with a black oxide coated stainless steel insert for strength. This adds prolonged hold-down properties between decking and joists. EXTREMEKD hidden deck fasteners are lab tested to be up to 3-times more sturdy, compared to other edge-mount fasteners. When using the EXTREMEKD, deck boards are secured solely on one side. This permits for the natural contraction and expansion that occurs on the width of hardwood decking. Biscuit deck fasteners, such as the EXTREMEKD, slide directly into the deck board's edge groove. Installers may router the required 5/32 in. side groove on site or use a biscuit joiner. Many decide to invest in pre-grooved boards purchased from lumber yards. Deck screws are installed at 45° through the fastener, down into the bottom groove edge of the board and into the joist. This places each deck board with even and consistent gaps due to the fastener's incorporated spacer leg.

EXTREMEKD Ipe Clip brand BROWN hidden fasteners with a 1/4 in. gap offer DIY homeowners a smooth, deck finish. EXTREMEKD implements an edge-mount system for fixing hardwood deck boards to joists. This also makes these hidden clips virtually invisible. The specific design of the clip also functions as a camouflaging instrument between board gaps. This also keeps the clip hidden between boards. The fastener is constructed from durable polypropylene resin, additionally improving chemical and UV resistance. The EXTREMEKD is injection molded with a stainless steel insert coated in black oxide. This hardened metal insert allows the EXTREMEKD to affix boards to joists for a lasting hold down. Put to the test against other favorite edge-mount fasteners, the EXTREMEKD is found to have up to 3X more strength. Whenever installing the hidden deck fastener, deck boards are attached merely on one side. This allows the natural expansion and contraction of hardwood decking. Biscuit fasteners such as the EXTREMEKD, sit inside the edge slot of deck boards. Contractors may select to cut the 5/32 in. edge slots themselves. This can be done with a router or biscuit joiner on-site. Purchasing pre-grooved deck boards is another option. At a 45° angle, screws are inserted through the Clip, down into the lower groove edge of the board. Then, into the joist. Due to the fasteners unique spacer leg, continual fastening of each deck board lengthwise with the EXTREMEKD, results in uniform gap spacing.

EXTREME-S Ipe Clip BLACK hidden deck fasteners with a 5/32 in. gap are trouble free and simple to install. DIY homeowners and contractors get a professional smooth deck surface that is blemish and fastener free. EXTREME-S fasteners use an edge mount method for attaching hardwood deck boards making these deck clips nearly invisible when installed. Our edge mount method camouflages the clip between board gaps, keeping the fastener out of sight. EXTREME-S clips are patented and are injection molded from a polypropylene resin. This hard resin coating further improves chemical and UV resistant properties. EXTREME-S hidden deck clips are manufactured with a rigid stainless steel insert inside, protected with a black oxide coating. This insert ensures a long lasting hold-down between decking and joists. The EXTREME-S is lab tested to be up to 3 times stronger compared to other edge-mount fasteners. Hardwood boards are screwed on a single side only, enabling natural expansion and contraction on the width of hardwood deck boards. As a biscuit style hidden fastener, these slide into an edge groove on the board. Builders can router the 5/32 in. side slot, utilizes a biscuit joiner or purchase decking with pre-grooved edges. Deck screws are installed at a 45° angle through the EXTREME-S clip, down into the board groove edge and into the joist below. Clip installation on successive deck boards guarantees even gap spacing due to the integrated gap spacer leg.

Not only are EXTREME-S Ipe Clip BLACK hidden deck fasteners with a 5/32 in. gap give D.I.Y. home-owners and builders a smooth surface, free of blemishes. The EXTREME-S is an edge-mount fastening system used to attach hardwood deck boards. As a result, these fasteners are virtually invisible after installation. This patented design acts as a camouflaging agent between board gaps. This keeps the fastener out of sight. The fastener is injection molded from a polypropylene plastic. This enhances its UV ray and chemical resistant properties. Designed with a black oxide coated stainless steel insert, the fastener securely attaches boards to joists. This aids with longer lasting hold-down strength. When compared to similar unseen fastening methods, EXTREME-S's have been tested in labs to be up to three times stronger. When installing the EXTREME-S, boards are attached to one side. This allows the natural wood to expand and contract. The EXTREME-S is a biscuit fastener, meaning it will fit into the edge grooves of decking boards. Installers can choose to router the 5/32 in. side groove on site, utilize a biscuit joiner for each clip, or purchase pre-grooved boards. Screws are intended to penetrate the EXTREME-S at a 45° angle through the bottom groove edge of the hardwood plank and down into to the joist. By consecutively installing each deck board along with the EXTREME-S fastener, this provides repetitive gap spacing from the EXTREME-S's primary spacer leg.

Installing EXTREME-S Ipe Clip BROWN hidden deck fasteners with a 5/32 in. gap is quick and easy. This clip offers contractors and DIY home-owners a high end, fastener-free decking surface. EXTREME-S deck fasteners utilize an edge-mount system to attach hardwood decking to joists. Our patented clip design offers camouflage between board gaps keeping the fastener out of sight. EXTREME-S fasteners are molded from a polypropylene resin that adds additional chemical and UV resistant properties. EXTREME-S Fasteners are crafted with a hardened stainless steel insert coated in black oxide. This insert tightly holds decking to joists for a prolonged hold-down. EXTREME-S hidden deck fasteners are lab tested to be up to 3x tougher and more robust than other edge-mount fasteners. When using the EXTREME-S, deck boards are secured only on 1 side. This allows for the expected expansion and contraction that naturally occurs on the width of hardwood decking. Created as a biscuit style hidden deck fastener, the EXTREME-S fits into the deck board's edge groove. Deck screws are then inserted at 45° through the fastener, down into the grooved edge and into the joist. Installers may router the 5/32 in. edge groove, use a job site biscuit joiner or choose to invest in pre-grooved decking boards. An integrated spacer leg on the EXTREME-S hidden deck clip assures even board gap spacing.

The Universal Hidden Deck Fastening System is the fastest, easiest way to hide fasteners on grooved decking. The universal hidden clip design works in most leading deck board brands. It features stainless steel components for long term performance. Color: Black.