Shop for cmi inc push to connect straight stop valve

The Tectite by Apollo 1/2 in. Push-To-Connect x 1/4 in. Push-To-Connect Quarter-Turn Straight Stop Valve is designed to control water flow to plumbing fixtures such as toilets and faucets. The Straight Stop Valve is used where the water pipe enters the room to allow for easy shut-off of water flow to the end fixture allowing for maintenance and repair without having to turn water off to the entire home. The 1/4 in. Push-To-Connect outlet allows you to use a 1/4 in. piece of PEX Pipe and a Tectite by Apollo 1/4 in. fixture fitting to create a custom length supply line to the end fixture. Simply cut the PEX to length, push end into stop valve and push fitting on to other end and screw into fixture. Tectite by Apollo push-to-connect stop valves are the cleanest and simplest way to gain flow control on copper, CPVC, PE-RT and ApolloPEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Stop valve removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo stop valves are approved for use in both potable water and hydronic heating piping systems. Color: Chrome. Material: Brass.

BrassCraft 1/2 in. Nominal Push Connect Inlet x 3/8 in. O.D. Compression Outlet 1/4-Turn Straight Valve controls water flow to household plumbing fixtures. The straight valve is most often used where the water pipe enters the room from the floor. With a 90° turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home. Push Connect valves are installation ready requiring no special tools, soldering or glue for a watertight seal. Color: Chrome Finish.

QUICKFITTING's patented technologies offer a full range of high-quality plumbing fittings and valves that are quick and easy to install. Our push-on valves are reusable, durable, permanent plumbing connections and get the job done 90% faster than traditional methods, including soldering. Our quick connection technology provides a simpler, safer and a more cost-effective solution for connecting Copper, PEX and CPVC piping in plumbing and heating applications. No open flames or sealants needed, just quickly clean and debur the end of the pipe, then push to connect the fitting. We raise the industry bar for push connect technology by continuing to develop and test our products to provide superior performance. Removal of our push fittings is effortless with our patented Slip Clip release tool. QUICKFITTING is a US-based company with a portfolio of over 100 patents and counting and our valves are backed by a 7-year warranty. Color: Chrome. Material: Brass.

SharkBite Push-to-connect stop valves are the fastest way to connect to PEX, copper, CPVC, or PE-RT stubouts. These valves control the flow of water to plumbing fixtures including faucets, toilets, dishwashers, washing machines, and ice makers. Braided supply lines, PEX, or copper tubing can be used to connect the outlet of the valve to plumbing fixtures. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings and valves can be easily changed or reused Designed with stainless steel gripping teeth for a secure connection, chlorine-resistant O-ring for a long-lasting seal. Material: Brass.

The CMI Inc Press Tankless Water Heater Service Valves Kit lets you easily connect your Tankless Water Heater to your water supply for easy maintenance and control. With your purchase, you will receive (1) Hot Valve,(1) Cold Valve, (1) Pressure Relief Valve, and a free PTFE Tape. The valves connect to the Tankless Water Heater with a 3/4 IPS Female connection. The small design makes it easily accessible and can fit in tight spaces.

The CMI Inc Tankless Water Heater Service Valves Kit allows you to easily connect your Tankless Water Heater to your water supply for easy maintenance and control. With your purchase you will receive:(1) Hot Valve,(1) Cold Valve and (1) Pressure Relief Valve and a free PTFE Tape. The valves connect to the Tankless Water Heater with a 3/4 in. IPS Female connection. The small design makes it easily accessible and can fit in tight spaces.

The CMI Inc 3/4 in. Tankless Water Heater Kit Female x Sweat with Pressure Relief Valve allows you to easily connect your Tankless Water Heater to your water supply for easy maintenance and control. With your purchase you will receive:(1) Hot Valve,(1) Cold Valve, and (1) Pressure Relief Valve and a free Teflon tape. The valves connect to the Tankless Water Heater with a 3/4 sweat connection. The small design makes it easily accessible and can fit in tight spaces.

The CMI Inc 3/4 in. Tankless Water Heater Kit T-Handle with Pressure Relief Valve allows you to easily connect your Tankless Water Heater to your water supply for easy maintenance and control. With your purchase you will receive: (1) Hot Valve, (1) Cold Valve, and (1) Pressure Relief Valve and a free teflon tape. The valves connect to the Tankless Water Heater with a 3/4 Female threaded connection. The T-handle design makes it easily accessible and can fit in tight spaces.

The CMI Inc Tankless Water Heater Service Valves Complete Kit allows you to easily connect your Tankless Water Heater to your water supply for easy maintenance and control. With your purchase you will receive:(2) 3/4 in. Brass Nipples, (2) Water Connectors 3/4 in. FIP X 3/4 in. FIP X18 in. (1) Gas Connector 3/4 in. x 3/4 in. x 18 in. (1) Pressure Relief Valve, (1) Hot Valve, (1) Cold Valve and FREE PTFE Thread Seal Tape. The valves connect to the Tankless Water Heater with a 3/4 IPS Female connection. The small design makes it easily accessible and can fit in tight spaces.

The CMI Inc Tankless Water Heater Service Valves Kit allows you to easily connect your Tankless Water Heater to your water supply for easy maintenance and control. With your purchase you will receive:(1) Hot Valve,(1) Cold Valve, and (1) Pressure Relief Valve and a free PTFE Tape. The valves connect to the Tankless Water Heater with a 3/4 IPS Female connection. The small design makes it easily accessible and can fit in tight spaces.