Shop for camper anchor tiedowns ca fd4

The Red Head 1/2 in. Solid Drop in Anchor Setting Tool is necessary for properly setting drop-in anchors. The anchor is properly expanded when the shoulder of the setting tool is flush with the top of anchor. Typical applications for a drop-in anchor are overhead applications, transformers and meters, ceiling fans and electrical light fixtures. To set a Red Head Drop-In anchor below the surface, drill a hole deeper than the anchor length, then thread the bolt through the anchor and hammer the anchor into the hole until the bolt head is at the desired depth. Remove the bolt and set the anchor with this setting tool.

MITEK LUGT girder tiedowns are adaptable connectors for girder trusses and offer several installation options to accommodate different framing conditions. The LUGT series is an ideal retrofit solution to reinforce truss connections to transfer high wind loads to supporting walls. The tiedowns feature a G90 galvanized finish for improved corrosion resistance. MITEK connectors are designed for high performance and easy installation with commonly-available fasteners. Material: Steel.

Kit Contains: 1 Anchor 1 Anchor Lead Chain 1 Nylon Anchor Line Anchor Lead Chain with Shackle: Hot Dipped Galvanized proof coil anchor lead chain 1/4 in. x 4 ft. with two 5/16 in. shackles. Nylon Anchor Line: 3/8 in. x 150 ft. Anchors: Each anchor is hot dipped galvanized for maximum corrosion protection. Material: Alloy.

This CURT tiedown backing plate is designed to strengthen a tiedown anchor and allow for more flexibility in installation. It features six holes to fit CURT tiedowns #83600, #83650, #83740 and #83742. The plate is finished in a black powder coat for excellent rust resistance, and it measures a total of 6" x 6" with 7/16" diameter holes. The center holes are spaced 2" apart, center to center, and the outer holes are spaced 3" x 3-1/4", center to center. Mounting screws are not included in this package. Material: Steel.

The Gripper Anchor is perfect for pontoons, fishing boats and runabouts. This anchor is designed for varied applications and conditions. Use it with or without an anchor winch like Minn Kota Deckhand, Power Winch, or Anchor Mate; in lakes or rivers with mud, sand, or rock bottoms with no chain needed. The Digger anchor is perfect for boaters that don't currently have an anchor winch, and may install one in the future, as the Gripper anchor is designed to perform well with or without an anchor winch. This innovative anchor features a wide base to prevent rolling and maintain anchor position, a unique fluke design for fast, deep in-line digs, and carefully designed hydrodynamics to enable straight drops and precise positioning.

Add comfort and style to any rope hammock with the stylish and comfortable Sunnydaze Cotton Quilted Hammock Pad and Pillow. This unique hammock pad and pillow are made with a durable yet soft cotton material and feature a vibrant and colorful print to add a pop of color to any patio, backyard or deck. It is great for sleeping in the sunshine in the backyard or hanging between 2 trees while camping. Easily secure this pad and pillow to any rope hammock with the attached tiedowns to prevent it from accidentally blowing off during windy conditions. Plus, its light weight makes it easy to travel with. This hammock pad is large enough to accommodate most rope hammocks.

Happijac's Frame Mount Tie Down System uses leverage to safely reduce the force on your truck and control camper movement in all directions. Happijac's patented design creates a horizontal, I-Beam truss structure with your truck frame, providing counter balances against the pulling weight of the camper and reducing force against the truck frame. Using Happijac's Tie Down anchor points with Happijac turnbuckles creates structural strength by triangulating leveraged counter forces. This configuration provides total control of front-back, up-down, and side-to-side movements. It also controls the yaw, pitch and roll of the camper. CA-FD7 fits 1997-2003 Ford F150 and F250 models under 8500 GVW.

Camper anchor tie downs - CA-FD4. Composed of quality materials for optimal performance and reliability. For use with Hippias camper tie down systems.

Happijac Front Anchor Plates - FA-CG07. Composed of quality materials for optimal performance and reliability. For use with Happijac camper tie down systems.

Front anchor plates - FA-CG9. Composed of quality materials for optimal performance and reliability. For use with Happijac camper tie down systems.