Shop for blacktop exterior asphalt filler and

The Latex-ite 10.1 oz. Driveway Crack and Joint Filler is for asphalt cracks and joints up to 1/2 in. wide. It is specially formulated using a combination of pure asphalts and polymers to ensure rapid drying and maximum durability. It has low VOC and fills up to 32 ft. with a 1/4 in. bead. (Note: If product is not available to order in your area that is due to nighttime temperatures. Product may not cure and/or track in late fall and early spring applications).

Fill asphalt cracks easily and safely with Small Black Permanent Blacktop Crack Filler. This contractor-grade, thermo-plastic black rubber provides a permanent, patented, self-leveling seal for small asphalt cracks and joints. It's designed for use with a heat gun or propane torch and produces a 100% watertight seal.

PC-Xtreme 600ml Joint and Crack filler. Use on concrete and blacktop. PC-Xtreme has extreme flexibility and can be applied in extreme temperature ranges. Requires 600ml dispensing gun.

The NEW PRO size Latex-ite 29 oz. Asphalt Driveway Crack and Joint Filler is for asphalt cracks and joints up to 1/2 in. wide. It is specially formulated using a combination of pure asphalts and polymers to ensure rapid drying and maximum durability. It has low VOC and fills up to 90 ft. with a 1/4 in. bead. Dries to touch in 2-hours, allow 24-hours to fully cure and before sealing over. Note: If product is not available to order in your area that is due to nighttime temperatures. Product may not cure and/or track in late fall and early spring applications.

Enhanced with ClimaSeal Technology to give maximum performance, unmatched durability and the best looking finish, Black Jack Drive-Maxx 1000 is the best quality rubberized blacktop filler and sealer designed for asphalt pavements. Drive-Maxx 1000 is also formulated with a combination of gel and fast dry technology for fast and easy installation, plus the ability to open your driveway to foot traffic faster. Can apply 45° to 99°, for extended application times. Under normal drying conditions, (temperatures above 75°F, clear sunny skies and humidity below 35%) this driveway sealer can be open to foot traffic in just 1-hour after application. For vehicle traffic, you must allow 24-hours for product to completely cure.

Black Jack Drive-Maxx 700 is a better quality rubberized blacktop filler and sealer designed for asphalt pavements. Armed with sand particles to fill in small cracks, Drive-Maxx 700-renews the look of old, worn driveways. Drive-Maxx 700 is enhanced with latex to improve performance and durability and includes Gel Technology for faster and easier installation.

Dalton SS-1H asphalt binder is an anionic emulsion designed for use as a tack coat for patching, paving, overlays and coating blacktop. SS-1H promotes adhesion to blacktop (bituminous concrete). It can be applied via spray, brush or squeegee and dilution is not necessary. Most all sprayers will work. SS1H Tack Coat is thin and has an approximate density of 8.2 lbs per gallon. There is no aggregate in the material. The material will not clean up with water so a solvent will need to be used. Therefore the sprayer system must be able to withstand solvents to clean up.

Dalton SS-1H asphalt binder is an anionic emulsion designed for use as a tack coat for patching, paving, overlays and coating blacktop. SS-1H promotes adhesion to blacktop (bituminous concrete). It can be applied via spray, brush or squeegee and dilution is not necessary. Most all sprayers will work. SS1H Tack Coat is thin and has an approximate density of 8.2 lbs per gallon. There is no aggregate in the material. The material will not clean up with water so a solvent will need to be used. Therefore the sprayer system must be able to withstand solvents to clean up.

Polyurea Crack and Joint filler for concrete and blacktop. Extremely flexible. Can be used in extreme temperatures. Used with standard caulking gun.

DAP Blacktop Asphalt VOC Compliant Filler & Sealant is a high-quality, professional-grade asphalt-based compound that is ready to use with no heating or mixing required. Use to make fast and easy repairs. Blacktop filler is designed to fill and seal cracks in asphalt surfaces. Formulated to flow smoothly into gaps and create a durable barrier that prevents water infiltration helping avoid ice damage and surface deterioration. It provides a robust, waterproof, and weatherproof seal that offers exceptional adhesion. Resists crumbling and drying out due to temperature fluctuations, UV exposure, and other harsh weather conditions. DAP sealant will not run or bubble in hot weather, and will not crack or become brittle in cold conditions. Drying into a matte black finish, it can be further coated with asphalt or tar-based driveway treatments. Holds up to the elements by resisting oil grease, and salt. Exterior use. DAP caulk and sealants provide durable performance for a variety of projects.