Shop for autotecnica 8724828040 heater pipe inlet outlet pre

Autotecnica 8724828040 Heater Pipe, Inlet/Outlet; Premium Metal Construction vs OEM Plastic

These metal and plastic dielectric heat traps help save energy by preventing heat loss through the inlet and outlet pipes of a water heater while the heater is idle. Measurements are 3/4 in. NPT x 3/4 in. NPT x 3 in. L. The fittings are self-cleaning.

Designed for use in high or low pressure installations. These valves are used with burners, torches, cooker equipment, air lines etc. 1/4 in. male pipe thread inlet with 1/4 in. female pipe thread outlet. Material: Brass.

These metal and plastic dielectric heat traps help save energy by preventing heat loss through the inlet and outlet pipes of a water heater while the heater is idle. Measurements are 3/4 in. NPT x 3/4 in. NPT x 3 in. in length. The fittings are self-cleaning.

The Rein Automotive line of OE-quality replacement parts was introduced to the NAFTA market in 2007. In German, 'Rein' means 'pure'. In the automotive industry, the Rein Automotive name has quickly come to stand for quality and reliability.

Horizontal Two Stage Propane Regulator, Inlet 1/4" Female NPT and Outlet 3/8" Female NPT. in. Specification: Inlet: 1/4 in. in. Female NPT. Outlet: 3/8 in. in. Female NPT. Outlet pressure: 11 in. in. WC. Maximum BTU: 160,000 BTU/hr. Used for RV appliance, gas generator, gas stove/range, propane heater, propane fireplace, hot water heater and more. in. Material: Steel.

Horizontal Two Stage Propane Regulator Specification: Inlet: POL tank connection. Outlet: 3/8 in. Female NPT. Outlet pressure: 11 in. WC. Maximum BTU: 160,000 BTU/hr. Used for RV appliance, gas generator, gas stove/range, propane heater, propane fireplace, hot water heater and more. Material: Brass.

Our new soaking bathtub heater is designed to maintain the bathtubs water temperature between 102°F and 104°F. The soaking bath heater eliminates the need for the bather to constantly add hot water. The heat system is comprised of a patented suction inlet and outlet fitting, on/off control, super quiet pump, 1500kW heater, 20 minute safety timer.

Pipe Mounting Kit (PMK) 20 in. Frame -Particularly useful in buildings with insufficient structural strength to use other types of mounts. Requires 3 in. (76 mm) pipe (3½ in./89 mm O.D.) (not supplied). Mounting kits are made of steel with wet-applied enamel paint. If the heater is installed on a structure to be transported, provide additional support for the heater during transit. The suspended weight should not exceed 300 lbs. (136 kg). Not suitable for models -HP 30, FR 30, HP 36, FR 36 or Tandem AH Series (24B fan configuration) Although RUFFNECK Unit Heaters are designed to be installed in an upright and level position, they may be installed in other positions. However, for steam service, the inlet must be above the outlet and the bottom of the core must drain toward the outlet. They are designed to be suspended from the top of the cabinet either with 2 or 4 (depending on model) 5/8 in. NC bolts screwed into internally threaded holes provided in the cabinet top panel. Adequate structural support must be provided for installation. Color: Light Green.

Pipe Mounting Kit (PMK) 12 in. Frame -Particularly useful in buildings with insufficient structural strength to use other types of mounts. Requires 3 in. (76 mm) pipe (3½ in./89 mm O.D.) (not supplied). Mounting kits are made of steel with wet-applied enamel paint. If the heater is installed on a structure to be transported, provide additional support for the heater during transit. The suspended weight should not exceed 300 lbs. (136 kg). Not suitable for models -HP 30, FR 30, HP 36, FR 36 or Tandem AH Series (24B fan configuration) Although RUFFNECK Unit Heaters are designed to be installed in an upright and level position, they may be installed in other positions. However, for steam service, the inlet must be above the outlet and the bottom of the core must drain toward the outlet. They are designed to be suspended from the top of the cabinet either with 2 or 4 (depending on model) 5/8 in. NC bolts screwed into internally threaded holes provided in the cabinet top panel. Adequate structural support must be provided for installation. Color: Light Green.

The Tectite by Apollo Water Heater Installation Kit with TankTee is the fastest, simplest and cleanest method by which to install a water heater with an expansion tank. With thread tape applied to water heater nipples, screw the TankTee to the cold water inlet and the 18 in. Corrugated Stainless Steel to the hot water outlet. After applying thread tape to the nipple on the expansion tank, screw the expansion tank into the threaded outlet of the TankTee and insert the 12 in. Corrugated Stainless Steel connector with brass insert into the top of the TankTee. Finally, make the final connections to the existing piping system utilizing the Push-To-Connect ends of the connectors. It is fast, simple and clean to install. Tectite by Apollo push-to-connect products are the cleanest and simplest way to gain flow control on copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Stop valve removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo products are approved for use in both potable water and hydronic heating piping systems.