Shop for 80v max 40v max xgt brushless cordless

The Makita Saw Chain 3/8 in. LP, .050 in., 62 (E-18225) is for use with both the 40V max XGT Brushless Cordless 18 in. Chain Saw and the 40V max XGT Brushless Cordless 18 in. Chain Saw (GCU04 and GCU06, both sold separately). The top plate indicators make sharpening easier. The Saw Chain features twin cutting corners for improved cutting performance and durability. It features low kickback in accordance with ANSI B175.1 standard. The E-18225 features a low-profile chain for increased cutting efficiency.

The 80V max (40V max X2) XGT Brushless 2 in. AVT Rotary Hammer Kit (GRH06PM) is a cordless concrete solution designed for heavy-load applications. It delivers the power, speed, and run-time for corded demands, without the cord. The GRH06PM is powered by two 40V max lithium-ion batteries, with an 80V brushless motor that delivers up to 27% faster drilling performance than an equivalent corded model. This hard-hitting performance is combined with advanced comfort and convenience features including Active Feedback-Sensing Technology (AFT), which electronically turns off the motor if rotation of bit is suddenly forced to stop. It is also equipped with Anti-Vibration Technology (AVT) for reduced vibration. More than just a padded handle, AVT is an internal counterbalance that uses air pressure to move counterweight pistons in the opposite direction of the drive piston to actively reduce vibration. In addition, the vibration-absorbing back handle and side handle are engineered to further reduce vibration. For added durability in harsh job site conditions, Extreme Protection Technology (XPT) is engineered for improved dust and water resistance. The Rotary Hammer has dust extraction capability with an optional Makita Dust Attachment Kit (sold separately). This Promotion also comes with two bonus BL4040 40V max XGT 4.0Ah Batteries.

The 40V max XGT Brushless Cordless 4-Speed Compact Vacuum (GLC01Z, tool only) is a compact and powerful cordless vacuum with strong suction for fast and efficient cleaning in commercial or residential use. This vacuum gets up to 80 minutes of continuous use in low speed using a single fully charged 40V max XGT 2.5Ah Battery. The powerful Makita-built brushless motor delivers up to 42 CFM and 84 in. static water lift. The vacuum has a quiet operating sound level of 65dB(A) on high and 54dB(A) on low. The efficient two-stage HEPA filter captures 99.97% of particulates .3 microns and larger. The bagless cloth filtration system allows for easier cleaning and quicker disposal of debris. The compact vacuum weighs only 3.7 lbs. with battery (sold separately). It stores easily with the included storage bracket. XGT is a system of equipment, tools, batteries, and chargers utilizing 40v max lithium-ion batteries. XGT is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the rest.

The 80V max (40V max X2) XGT Brushless 14" Power Cutter with AFT and Electric Brake (GEC01PL4) has the power to cut through various masonry and metal materials with all the benefits and convenience of cordless operation. The 14" wheel diameter allows for single pass cuts up to 5" deep in various masonry and metal materials. Model GEC01PL4 is a kit and includes four 40V max XGT 8.0Ah Batteries (BL4080F) and an efficient 40V max XGT Dual Port Rapid Optimum Charger (DC40RB). The benefits of a cordless power cutter over gas include no oil or mixing, lower noise, less maintenance, zero emissions and no pull starts. This means instant starts, cost savings and the ability to use the power cutter indoors. It has an integrated water delivery system with a water flow adjustment knob that continuously feeds water for OSHA Table 1 Compliance in concrete cutting applications The belt-drive design provides smoother operation with lower vibration. The GEC01 has a Makita-built brushless motor combined with two 40V max XGT batteries to deliver the performance equivalent to a 75.6cc gas-powered model. The brushless motor runs cooler and more efficiently for longer life and can deliver up to 5,300 RPM. The GEC01 is engineered with Active Feedback-Sensing Technology (AFT), which electronically turns off the motor if the rotation of the cutting wheel is suddenly forced to stop. This promotion also comes with a bonus BL4080F 40V max XGT 8.0Ah Battery.

The 80V max (40V max X2) XGT Brushless 14" Power Cutter with AFT and Electric Brake (GEC01PL) has the power to cut through various masonry and metal materials with all the benefits and convenience of cordless operation. The 14" wheel diameter allows for single pass cuts up to 5" deep in various masonry and metal materials. Model GEC01PL is a kit and includes two 40V max XGT 8.0Ah Batteries (BL4080F) and an efficient 40V max XGT Dual Port Rapid Optimum Charger (DC40RB). The benefits of a cordless power cutter over gas include no oil or mixing, lower noise, less maintenance, zero emissions and no pull starts. This means instant starts, cost savings and the ability to use the power cutter indoors. It has an integrated water delivery system with a water flow adjustment knob that continuously feeds water for OSHA Table 1 Compliance in concrete cutting applications. The belt-drive design provides smoother operation with lower vibration. The GEC01 has a Makita-built brushless motor combined with two 40V max XGT batteries to deliver the performance equivalent to a 75.6cc gas-powered model. The brushless motor runs cooler and more efficiently for longer life and can deliver up to 5,300 RPM.

The 80V max (40V max X2) XGT Brushless 14" Power Cutter with AFT and Electric Brake (GEC01PL) has the power to cut through various masonry and metal materials with all the benefits and convenience of cordless operation. The 14" wheel diameter allows for single pass cuts up to 5" deep in various masonry and metal materials. Model GEC01PL is a kit and includes two 40V max XGT 8.0Ah Batteries (BL4080F) and an efficient 40V max XGT Dual Port Rapid Optimum Charger (DC40RB). The benefits of a cordless power cutter over gas include no oil or mixing, lower noise, less maintenance, zero emissions and no pull starts. This means instant starts, cost savings and the ability to use the power cutter indoors. It has an integrated water delivery system with a water flow adjustment knob that continuously feeds water for OSHA Table 1 Compliance in concrete cutting applications. The belt-drive design provides smoother operation with lower vibration. The GEC01 has a Makita-built brushless motor combined with two 40V max XGT batteries to deliver the performance equivalent to a 75.6cc gas-powered model. The brushless motor runs cooler and more efficiently for longer life and can deliver up to 5,300 RPM.

The 80V max (40V max X2) XGT Brushless 14" Power Cutter with AFT and Electric Brake (GEC01PL4) has the power to cut through various masonry and metal materials with all the benefits and convenience of cordless operation. The 14" wheel diameter allows for single pass cuts up to 5" deep in various masonry and metal materials. Model GEC01PL4 is a kit and includes four 40V max XGT 8.0Ah Batteries (BL4080F) and an efficient 40V max XGT Dual Port Rapid Optimum Charger (DC40RB). The benefits of a cordless power cutter over gas include no oil or mixing, lower noise, less maintenance, zero emissions and no pull starts. This means instant starts, cost savings and the ability to use the power cutter indoors. It has an integrated water delivery system with a water flow adjustment knob that continuously feeds water for OSHA Table 1 Compliance in concrete cutting applications The belt-drive design provides smoother operation with lower vibration. The GEC01 has a Makita-built brushless motor combined with two 40V max XGT batteries to deliver the performance equivalent to a 75.6cc gas-powered model. The brushless motor runs cooler and more efficiently for longer life and can deliver up to 5,300 RPM. The GEC01 is engineered with Active Feedback-Sensing Technology (AFT), which electronically turns off the motor if the rotation of the cutting wheel is suddenly forced to stop.

The 80V max (40V max X2) XGT Brushless 14 in. Power Cutter with AFT and Electric Brake (GEC01PL4) has the power to cut through various masonry and metal materials with all the benefits and convenience of cordless operation. The 14 in. wheel diameter allows for single pass cuts up to 5 in. deep in various masonry and metal materials. Model GEC01PL4 is a kit and includes four 40V max XGT 8.0Ah Batteries (BL4080F) and an efficient 40V max XGT Dual Port Rapid Optimum Charger (DC40RB). The benefits of a cordless power cutter over gas include no oil or mixing, lower noise, less maintenance, zero emissions and no pull starts. This means instant starts, cost savings and the ability to use the power cutter indoors. It has an integrated water delivery system with a water flow adjustment knob that continuously feeds water for OSHA Table 1 Compliance in concrete cutting applications The belt-drive design provides smoother operation with lower vibration. The GEC01 has a Makita-built brushless motor combined with two 40V max XGT batteries to deliver the performance equivalent to a 75.6cc gas-powered model. The brushless motor runs cooler and more efficiently for longer life and can deliver up to 5,300 RPM. The GEC01 is engineered with Active Feedback-Sensing Technology (AFT), which electronically turns off the motor if the rotation of the cutting wheel is suddenly forced to stop. This promotion also comes with 2 bonus BL4080F 40V max XGT 8.0Ah Batteries.

The 80V max (40V max X2) XGT Brushless Brush Cutter (GRU05Z) is engineered to provide the power equivalent to a 40cc brush cutter, but with lower noise, less maintenance, zero emissions, and no pull starts. It also has lower weight than a comparable gas-powered brush cutter. It can deliver to 100 minutes of run time with two 40V XGT 4.0Ah batteries (batteries not included). The GRU05Z has a bike-handle design for improved grip and a more ergonomic working position and includes a 10 in. steel four-tooth brush cutter blade for cutting grasses, shrubs, and underwood. The Brush Cutter has a variable speed trigger and three speed settings (Low: 0-3, 500 RPM, Medium: 0-5, 000 High: 0-6, 400 RPM) for power and run time management. In addition, users can set the Automatic Torque Drive Technology mode, which automatically shifts from 3, 500-6, 400 RPM for extended run time or added power. It also features a reverse function that quickly clears the trimmer head of entangled grass and weeds. The steel drive shaft is engineered for reduced vibration. For added durability, it features IPX4 weather-resistant construction, and Extreme Protection Technology (XPT) engineered for improved dust and water resistance.

The 80V max (40V max X2) XGT Brushless Brush Cutter (GRU05PM) is engineered to provide the power equivalent to a 40cc brush cutter, but with lower noise, less maintenance, zero emissions, and no pull starts. It also has lower weight than a comparable gas-powered brush cutter. It can deliver to 100 minutes of run time with two 40V XGT 4.0Ah batteries. The GRU05PM has a bike-handle design for improved grip and a more ergonomic working position and includes a 10 in. steel four-tooth brush cutter blade for cutting grasses, shrubs, and underwood. The Brush Cutter has a variable speed trigger and three speed settings (Low: 0-3, 500 RPM, Medium: 0-5, 000 High: 0-6, 400 RPM) for power and run time management. In addition, users can set the Automatic Torque Drive Technology mode, which automatically shifts from 3, 500-6, 400 RPM for extended run time or added power. It also features a reverse function that quickly clears the trimmer head of entangled grass and weeds. The steel drive shaft is engineered for reduced vibration. For added durability, it features IPX4 weather-resistant construction, and Extreme Protection Technology (XPT) engineered for improved dust and water resistance.