Shop for 24 volt cordless chain saw sharpener tool only

Dull chains are dangerous and difficult to work with, and taking trips to the hardware store to get them sharpened wastes time and money. So, next time your chain saw or pole chain saw pulverizes wood and cant cut cleanly any more, reach for the 24V-CSSHRP-CT 24-Volt Cordless Chain Sharpener from Sun Joe. Designed to work with virtually all saw chains, 24V-CSSHRP is the perfect tool to keep your chain in top cutting condition. Simply position your dull chain along the guide, set your swivel angle from -30 to +30 left or right, and use the 100-Grit, aluminum oxide grinding wheel to keep your tools cutting teeth razor sharp. Adjust the grinding depth with a quick twist of the knob for a precise cut every time. The powerful 65.5-Watt motor spins the grinding wheel at up to 6,500 RPM, sharpening your worn chains in less time and with less effort than manual sharpeners. The sturdy base mounts securely on any table or bench for maximum control during use. Plus, 24V-CSSHRP is perfect for use anywhere power is at a premium with the cordless convenience of IONMAX: Sun Joes exclusive, eco-friendly 24-Volt lithium-ion battery system. And IONMAX provides up to 40 minutes of rechargeable runtime with no-fade power + performance, and is compatible with Snow Joe + Sun Joes complete 24-Volt Cordless tool universe (Battery Sold Separately in Tool Only Version).

Landscapers and contractors are demanding more cordless alternatives to corded and gas-powered outdoor power equipment. Makita is meeting demand with an expanding line of cordless OPE, including the 18-Volt X2 LXT (36V) Brushless Chain Saw (model XCU03Z, tool only). With zero emissions, lower noise, and considerably less maintenance, the XCU03Z is a welcome solution for cutting and trimming applications. Its powered by two 18-Volt LXT batteries (sold separately) for 36-Volt power and run time, but without leaving the strongly-preferred 18-Volt battery platform. And with the efficient Makita outer rotor brushless motor with direct drive system, users get high power efficiency that is equivalent to a gas chain saw. The XCU03Z has a 14 in. guide bar and the Makita-built motor with variable speed delivers 0-3,940 FPM for increased cutting speed, but with less noise (only 100 dBA). It has zero emissions and reduced maintenance: there's no engine oil to change, no spark plug to replace, and no air filter or muffler to clean. And there's no need to drain the fuel for storage. Simply pick it up, load two 18-Volt LXT Lithium-Ion batteries, and the saw is ready to use. Convenience features include a tool-less chain adjustments, a front hand guard engineered to actuate chain brake when engaged, an electric brake for maximum productivity, and more. This Promotion also comes with a bonus Makita DC18RD 18-Volt LXT Lithium-Ion Dual Port Rapid Optimum Charger.

Landscapers and contractors are demanding more cordless alternatives to corded and gas-powered outdoor power equipment. Makita is meeting demand with an expanding line of cordless OPE, including the 18-Volt X2 LXT (36-Volt) Brushless Chain Saw Kit (XCU03PT1). With 0 emissions, lower noise and considerably less maintenance, the Chain Saw is a welcome solution for cutting and trimming applications. Its powered by two 18-Volt LXT batteries for 36-Volt power and run time, but without leaving the strongly-preferred 18-Volt battery platform. And with the efficient Makita outer rotor Brushless Motor with direct drive system, users get high power efficiency that is equivalent to a gas chain saw. The Chain Saw has a 14 in. guide bar and the Makita-built motor with variable speed delivers 0 FPM - 3,940 FPM for increased cutting speed, but with less noise (only 100 dBA). It has 0 emissions and reduced maintenance there's no engine oil to change, no spark plug to replace and no air filter or muffler to clean. And there's no need to drain the fuel for storage. Simply pick it up, load two 18-Volt LXT Lithium-Ion batteries and the saw is ready to use. Convenience features include a tool-less chain adjustments, a front hand guard engineered to actuate chain brake when engaged, an electric brake for maximum productivity and more. This bundle includes the XDT131 18-Volt LXT Lithium-Ion Brushless Cordless Impact Driver Kit with 1 Battery 3.0 Ah.

Landscapers and contractors are demanding more cordless alternatives to gas-powered outdoor power equipment. Makita is meeting demand with an expanding line of cordless OPE, including the 18-Volt X2 LXT (36-Volt) Brushless 14 in. Chain Saw (model XCU07Z, tool only, batteries and charger sold separately). With zero emissions, lower noise and considerably less maintenance, the XCU07Z is a welcome solution for cutting and trimming applications. Its powered by two 18-Volt LXT batteries (sold separately) for 36-Volt power and run time, but without leaving the strongly-preferred 18-Volt battery platform. And with the efficient Makita outer rotor Brushless Motor with direct drive system, users get high power efficiency that is equivalent to a gas chain saw. The XCU07Z has a 14 in. guide bar and the Makita-built motor with variable speed delivers 0 FPM to 3,940 FPM for increased cutting speed. It has zero emissions and reduced maintenance: there's no engine oil to change, no spark plug to replace and no air filter or muffler to clean. And there's no need to drain the fuel for storage. Simply pick it up, load two 18-Volt LXT Lithium-Ion batteries (sold separately) and the saw is ready to use. This promotion also includes a XHU04Z 18V X2 (36V) LXT Lithium-Ion Cordless 25-1/2" Hedge Trimmer, Tool Only and come with a bonus BL1850B2DC2 18V LXT Lithium-Ion Battery and Dual Port Charger Starter Pack (5.0Ah).

Tackle multiple types of jobs at the worksite with this 20-Volt to 60-Volt MAX Brushless Cordless 3-Tool Combo Kit. You can take advantage of up to 42% more power when the 20-Volt maximum 1/2 in. Brushless Cordless Ha mmer Drill/Driver is paired with DEWALT flexvolt (R) batteries. This kit is also equipped with the 60V MAX 7-1/4 in. Cordless Circular Saw with an automatic brake designed to prevent accidental cuts. Producing up to 2,456 unit Watts out, this tool was engineered to deliver up to 47% more cutting power than the DCS575 60V MAX Circular Saw. The saw combines the power of a corded power tool with the portability and convenience of cordless using flexvolt (TM) tool technology that offers a no-load speed of 5,800 rpm. For a limited time get a 20-Volt Router, 20-Volt Oscillating Tool and 20-Volt 1/4 Sheet Sand er (Tools-Only) with purchase.

If you've wondered whether a cordless chainsaw could perform as well as gas, RYOBI has your answer. The 40-Volt 14 in. HP Cordless Chainsaw includes features to make your cutting experiences more efficient than a gas unit, with the convenience of battery powered operation. with the pull of a trigger, the 40-Volt HP technology paired with a Brushless Motor delivers 15% more power, along with longer runtime and motor life. with a 24 in. cut capacity, adjustable automatic oiler, side access chain tensioning and on-board tool storage, you'll experience easy, comfortable operation for any clearing jobs. Also included, the RYOBI 40-Volt Pole Saw. This saw easily extends from 6.5 ft. to 9.5 ft, allowing you to trim hard to reach places. The powerful in-line motor and angled cutting head allow for precise cutting with the 10 in. bar and chain. This pole saw features an automatic bar and chain oiler, for convenient operation and maintenance. This tool is compatible with all 40-Volt batteries. The RYOBI 40-Volt Chainsaw and Pole Saw are backed by a 5-year warranty.

The DEWALT 60-Volt MAX Chainsaw features a low kick back 16 in. Bar and Chain for both construction and outdoor cutting applications. Its tool-free chain tensioning and bar tightening knob enable proper bar clamping force. This saw features auto-oiling for continuous lubrication. Our durable 16 in. Replacement Saw Chain DWO1DT616T is designed to fit 16 in. bars on the DEWALT 60-Volt MAX Cordless Chainsaw (DCCS670).

Landscapers and contractors are demanding more cordless alternatives to corded and gas-powered outdoor power equipment. Makita is meeting demand with an expanding line of cordless OPE, including the 18-Volt X2 LXT (36-Volt) Brushless Chain Saw Kit (XCU03PT1). With 0 emissions, lower noise and considerably less maintenance, the Chain Saw is a welcome solution for cutting and trimming applications. Its powered by two 18-Volt LXT batteries for 36-Volt power and run time, but without leaving the strongly-preferred 18-Volt battery platform. And with the efficient Makita outer rotor Brushless Motor with direct drive system, users get high power efficiency that is equivalent to a gas chain saw. The Chain Saw has a 14 in. guide bar and the Makita-built motor with variable speed delivers 0 FPM-3,940 FPM for increased cutting speed, but with less noise (only 100 dBA). It has 0 emissions and reduced maintenance there's no engine oil to change, no spark plug to replace and no air filter or muffler to clean. And there's no need to drain the fuel for storage. Simply pick it up, load two 18-Volt LXT Lithium-Ion batteries and the saw is ready to use. Convenience features include a tool-less chain adjustments, a front hand guard engineered to actuate chain brake when engaged, an electric brake for maximum productivity and more. Model XCU03PT1 is a kit and includes the Chain Saw, 4 fast-charging 18-Volt LXT Lithium-Ion 5.0 Ah batteries and an efficient 18-Volt Dual Port Rapid Optimum Charger.

Landscapers and contractors are demanding more cordless alternatives to corded and gas-powered outdoor power equipment. Makita is meeting demand with an expanding line of cordless OPE, including the 18-Volt X2 LXT (36-Volt) Brushless Chain Saw (model XCU03Z, tool only). With zero emissions, lower noise, and considerably less maintenance, the XCU03Z is a welcome solution for cutting and trimming applications. It's powered by two 18-Volt LXT batteries (sold separately) for 36-Volt power and run time, but without leaving the strongly-preferred 18-Volt battery platform. And with the efficient Makita outer rotor brushless motor with direct drive system, users get high power efficiency that is equivalent to a gas chain saw. The XCU03Z has a 14 in. guide bar and the Makita-built motor with variable speed delivers 0-3,940 FPM for increased cutting speed, but with less noise (only 100dB(A)). It has zero emissions and reduced maintenance: there's no engine oil to change, no spark plug to replace, and no air filter or muffler to clean. And there's no need to drain the fuel for storage. Simply pick it up, load two 18-Volt LXT Lithium-Ion batteries, and the saw is ready to use. Convenience features include a "tool-less" chain adjustments, a front hand guard engineered to actuate chain brake when engaged, an electric brake for maximum productivity, and more.

The 18V X2 (36V) LXT Brushless Cordless Couple Shaft Power Head Kit with String Trimmer and Pole Saw attachments is a welcome solution for a range of trimming and cutting applications. With zero emissions, lower noise and maximum versatility, the power head delivers maximum performance and run time without the hassles of gas and without leaving the 18V LXT battery platform. The lever style lock system allows for quick tool-less installation and replacement of attachments. The 10 in. Pole Saw Attachment provides 7 ft. fixed length for trimming hard to reach branches and the String Trimmer Attachment includes a rapid loading bump and feed trimmer head loaded with 0.080 in. twisted quiet line. The couple shaft can also be used with multiple other attachments for edging, cultivating, and brush cutting (sold separately). The Makita-built BL Brushless motor delivers up to 7,000 RPM with String Trimmer Attachment and 3,940 FPM with 10 in. Pole Saw Attachment. Makita's efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per battery charge than similar non-brushless tools. This bundle also includes the XBU03Z 116 MPH 459 CFM 18-Volt LXT Lithium-Ion Brushless Cordless Blower (Tool-Only), XHU02Z 22 in. 18-Volt LXT Lithium-Ion Cordless Hedge Trimmer (Tool-Only), and XCU06Z 10 in. 18-Volt LXT Lithium-Ion Brushless Cordless Top Handle Chain Saw (Tool-Only).