Shop for 2 conductor splicing wire connector 100 pack

The Push-In design wire connector is a great solution for your electric wiring needs at home, in the office or anywhere where electric wiring is needed. It is very easy to use, save your installation time and best of all, it connects wires securely and safely. You can easily disconnect and reconnect the wires easily. The connector can also be reused with unlimited times.

Pull the lever up, insert a conductor and push the lever back down - done. Tool-free and lever-actuated, WAGO's 221 Series wire splicing connectors easily, quickly and safely connect solid, stranded and fine-stranded conductors of different cross sections using 2-wire, 3-wire and 5-wire connectors. These connectors are available in 2 variants which accommodate 24-12 AWG and 20-10 AWG wire. Opening the levers on the 221 Series requires little effort. This means that you can connect conductors quickly - and without tools. While connecting the conductor, recessed handles on the sides ensure an easy, secure grip on the connector. For peace of mind, you can test the voltage from either side of the connector even when installed - 1 test point is in the conductor entry direction and the other is on the opposite side. This accessibility provides extremely convenient testing conditions, for a wide range of applications. In addition, mounting carriers are available for every 221 Series splicing connector. Each variant can be mounted vertically or horizontally. Simply secure the carrier by snapping it onto the DIN-rail or with screws on smooth surfaces. Flexible mounting clamps simplify both connector insertion and removal. Conductors can be conveniently connected and removed before or after inserting a connector into the carrier. 1 test slot is always accessible to ensure compliance with VDE standards.

Pull the lever up, insert a conductor and push the lever back down - done. Tool-free and lever-actuated, WAGO's 221 Series wire splicing connectors easily, quickly and safely connect solid, stranded and fine-stranded conductors of different cross sections using 2-wire, 3-wire and 5-wire connectors. These connectors are available in 2 variants which accommodate 24-12 AWG and 20-10 AWG wire. Opening the levers on the 221 Series requires little effort. This means that you can connect conductors quickly - and without tools. While connecting the conductor, recessed handles on the sides ensure an easy, secure grip on the connector. For peace of mind, you can test the voltage from either side of the connector even when installed - 1 test point is in the conductor entry direction and the other is on the opposite side. This accessibility provides extremely convenient testing conditions, for a wide range of applications. In addition, mounting carriers are available for every 221 Series splicing connector. Each variant can be mounted vertically or horizontally. Simply secure the carrier by snapping it onto the DIN-rail or with screws on smooth surfaces. Flexible mounting clamps simplify both connector insertion and removal. Conductors can be conveniently connected and removed before or after inserting a connector into the carrier. 1 test slot is always accessible to ensure compliance with VDE standards.

Ease of use - pull the lever up, insert a conductor and push the lever back down. You can easily terminate conductors from 0.14 to 4 sq. mm and connect solid, stranded and fine-stranded conductors. Quickly installs devices with higher levels of power consumption.

Pull the lever up, insert a conductor and push the lever back down - done, Tool-free and lever-actuated, WAGO's 221 Series wire splicing connectors easily, quickly and safely connect solid, stranded and fine-stranded conductors of different cross sections using 2-,3-, and 5-wire connectors. These connectors are available in 2 variants which accommodate 24-12 AWG and 20-10 AWG wire. Opening the levers on the 221 Series requires little effort. This means that you can connect conductors quickly - and without tools, While connecting the conductor, recessed handles on the sides ensure an easy, secure grip on the connector. For peace of mind, you can test the voltage from either side of the connector even when installed - 1 test point is in the conductor entry direction and the other is on the opposite side. This accessibility provides extremely convenient testing conditions, for a wide range of applications. In addition, mounting carriers are available for every 221 Series splicing connector. Each variant can be mounted vertically or horizontally. Simply secure the carrier by snapping it onto the DIN-rail, or with screws on smooth surfaces. Flexible mounting clamps simplify both connector insertion and removal. Conductors can be conveniently connected and removed before or after inserting a connector into the carrier. 1 test slot is always accessible to ensure compliance with VDE standards.

Pull the lever up, insert a conductor and push the lever back down - done. Tool-free and lever-actuated, WAGO's 221 Series wire splicing connectors easily, quickly and safely connect solid, stranded and fine-stranded conductors of different cross sections using 2-wire, 3-wire and 5-wire connectors. These connectors are available in 2 variants which accommodate 24-12 AWG and 20-10 AWG wire. Opening the levers on the 221 Series requires little effort. This means that you can connect conductors quickly - and without tools. While connecting the conductor, recessed handles on the sides ensure an easy, secure grip on the connector. For peace of mind, you can test the voltage from either side of the connector even when installed - 1 test point is in the conductor entry direction and the other is on the opposite side. This accessibility provides extremely convenient testing conditions, for a wide range of applications. In addition, mounting carriers are available for every 221 Series splicing connector. Each variant can be mounted vertically or horizontally. Simply secure the carrier by snapping it onto the DIN-rail or with screws on smooth surfaces. Flexible mounting clamps simplify both connector insertion and removal. Conductors can be conveniently connected and removed before or after inserting a connector into the carrier. 1 test slot is always accessible to ensure compliance with VDE standards.

8-conductor Voice Grade QuickPort Snap-in Jack, Ivory Modular connector for voice grade structured cabling systems. Snaps into the entire Leviton QuickPort family of workstation housings, Multimedia Outlet System (with QuickPort module adapter), Decora Inserts, patch panels and patch blocks. Exclusive cutting ledge combines termination and trim into one laborsaving step. Individual-port configurability allows specification flexibility. Robust one-piece lead-frame design. Narrow connector allows high port density in a small area. Voice Grade and USOC wire configuration labels. Pack of 4. Material: Plastic.

Blackburn Dual-Rated Mechanical Connector. Type ADR-ALCUL 2-Conductor, 1-hole Mount, Conductor. Wire range 14 AWG-2/0 Str. Connector is made a tin-plated aluminum.

This wire connector is blue in color. It is UL Listed for pressure type wire connector. It can be used on solid and/or stranded copper wires.

For conventional copper and copper dry splices, the Contractors' Choice Yellow 2 Port Push-In is a quality connector that will keep splices safe and pass inspection. It is tested per UL and CSA standards as a pressure cable connector, meets the requirements of NEC standards, and is encased by a polycarbonate (PC) flame retardant shell. The Yellow 2 Port Push-In is also color coded to meet industry standards for easy identification.