Shop for 000 mechanical edge o dock leveler

The Edge-O-Dock leveler permanently attaches to the face of a dock. It is recommended for docks to be at least 48 in. high. When the trailer departs, the lip drops automatically behind the face of the bumpers. Concrete recess is not required. It comes complete with bumpers and installation instructions. The ramp width is 66 in. A steel dock edge, or approach ramp is required for proper installation. The Electric Hydraulic Edge-O-Dock is the easiest to operate. After the truck is backed against the dock, push and hold the control button. The leveler raises and the lip will extend. The unit comes complete with motor, pump, control box, cylinder, lines and oil. The truck must pull out for leveler to return to stored position.

The Edge-O-Dock leveler permanently attaches to the face of a dock. It is recommended for docks to be at least 48 in. high. When the trailer departs, the lip drops automatically behind the face of the bumpers. Concrete recess is not required. It comes complete with bumpers and installation instructions. The ramp width is 72 in. A steel dock edge, or approach ramp is required for proper installation. The Electric Hydraulic Edge-O-Dock is the easiest to operate. After the truck is backed against the dock, push and hold the control button. The leveler raises and the lip will extend. The unit comes complete with motor, pump, control box, cylinder, lines and oil. The truck must pull out for leveler to return to stored position.

The Edge-O-Dock leveler permanently attaches to face of dock. It is recommended for docks to be at least 48 in. high. When the trailer departs, the lip drops automatically behind the face of the bumpers. Concrete recess is not required. It comes complete with bumpers and installation instructions. The ramp width is 72 in. A steel dock edge, or approach ramp is required for proper installation. The Mechanical Edge-O-Dock is operated by placing the actuation handle into the pocket of the inner lip and pulling down toward the floor. The operator then pushes the handle forward until the lip rests on the truck bed. As the trailer departs, the lip retracts behind the bumper face automatically.

The Mechanical Edge-O-Dock leveler permanently attaches to face of dock. It is recommended for docks to be at least 48 in. high. When the trailer departs, the lip drops automatically behind the face of the bumpers. Concrete recess is not required. It comes complete with bumpers and installation instructions. The Dock leveler features a 66 in. ramp. A steel dock edge, or approach ramp is required for proper installation. The Mechanical Edge-O-Dock leveler is operated by placing the actuation handle into the pocket of the inner lip and pulling down toward the floor. The operator then pushes the handle forward until the lip rests on the truck bed. As the trailer departs, the lip retracts behind the bumper face automatically.

The Edge-O-Dock leveler permanently attaches to face of dock. It is recommended for docks to be at least 48 in. high. When the trailer departs, the lip drops automatically behind the face of the bumpers. Concrete recess is not required. It comes complete with bumpers and installation instructions. The ramp width is 66 in. A steel dock edge, or approach ramp is required for proper installation. The Mechanical Edge-O-Dock is operated by placing the actuation handle into the pocket of the inner lip and pulling down toward the floor. The operator then pushes the handle forward until the lip rests on the truck bed. As the trailer departs, the lip retracts behind the bumper face automatically.

The Edge-O-Dock leveler permanently attaches to face of dock. It is recommended for docks to be at least 48 in. high. When the trailer departs, the lip drops automatically behind the face of the bumpers. Concrete recess is not required. It comes complete with bumpers and installation instructions. The ramp width is 72 in. A steel dock edge, or approach ramp is required for proper installation. The Mechanical Edge-O-Dock is operated by placing the actuation handle into the pocket of the inner lip and pulling down toward the floor. The operator then pushes the handle forward until the lip rests on the truck bed. As the trailer departs, the lip retracts behind the bumper face automatically.

The Edge-O-Dock leveler permanently attaches to face of dock. It is recommended for docks to be at least 48 in. high. When the trailer departs, the lip drops automatically behind the face of the bumpers. It comes complete with bumpers and installation instructions. Standard Ramping is 27 in., with a 36 in. long ramping length available for smaller grade. The Mechanical Edge-O-Dock is operated by placing the actuation handle into the pocket of the inner lip and pulling down toward the floor. The operator then pushes the handle forward until the lip rests on the truck bed. As the trailer departs, the lip retracts behind the bumper face automatically. Material: Steel.

The Edge-O-Dock leveler permanently attaches to the face of a dock. It is recommended for docks to be at least 48 in. high. When the trailer departs, the lip drops automatically behind the face of the bumpers. It comes complete with bumpers and installation instructions. Standard Ramping is 27 in. with a 36 in. long ramping length available. The Electric Hydraulic Edge-O-Dock is the easiest to operate. After the truck is backed against the dock, push and hold the control button. The leveler raises and the lip will extend. The unit comes complete with motor, pump, control box, cylinder, lines and oil. The truck must pull out for leveler to return to stored position. Material: Steel.

The Edge-O-Dock leveler permanently attaches to face of dock. It is recommended for docks to be at least 48 in. H. When the trailer departs, the lip drops automatically behind the face of the bumpers. It comes complete with bumpers and installation instructions. Standard Ramping is 27 in., with a 36 in. long ramping length available for smaller grade. The Mechanical Edge-O-Dock is operated by placing the actuation handle into the pocket of the inner lip and pulling down toward the floor. The operator then pushes the handle forward until the lip rests on the truck bed. As the trailer departs, the lip retracts behind the bumper face automatically. Material: Steel.

The Edge-O-Dock leveler permanently attaches to face of dock. It is recommended for docks to be at least 48 in. high. When the trailer departs, the lip drops automatically behind the face of the bumpers. It comes complete with bumpers and installation instructions. Standard Ramping is 27 in., with a 36 in. long ramping length available for smaller grade. The Mechanical Edge-O-Dock is operated by placing the actuation handle into the pocket of the inner lip and pulling down toward the floor. The operator then pushes the handle forward until the lip rests on the truck bed. As the trailer departs, the lip retracts behind the bumper face automatically. Material: Steel.